HI-TEMP ADJUSTABLE AIR AMPLIFIER
- Information
- Specifications
- FAQs
- How It Works
- Applications
- Dimensions
- Accessories
- Installation & Maintenance
- Streamtek index page
What is an Air Amplifier?
The STREAMTEK Air Amplifier is a simple, low cost way to move smoke, air, light materials, and fumes. Using just a small amount of compressed air as their power source, Air Amplifiers pull in massive volumes of air from the surrounding environment to product high velocity, high volume outlet flows. Quit, efficient STREAMTEK Air Amplifiers will create output flows up to 25 times their consumption rate.
Which will best suite my needs?
STREAMTEK™ Corp., manufactures the Standard & Adjustable Air Amplifier, available in both aluminum and stainless steel. Both are easy to mount and maintain, reducing both compressed air consumption and noise levels. The adjustable has an air gap that is infinitely adjustable which regulates the consumption and outlet flow from a "breeze" to a "blast".
Air Amplifier Comparison |
||||
Temperature Rating |
Sound Level |
Corrosive Applications |
Description |
|
Aluminum Adjustable |
275F (135C) |
Variable |
No |
1-1/4" to 4" |
Stainless Steel Adjustable |
400F (204C) |
Variable |
Yes |
1-1/4" to 4" |
(Hi-Temp) Stainless Steel Adjustable |
700F (371C) |
Variable |
Yes |
1-1/4" to 2½" |
 |
|
|
|
|
|
|
|
|
|||||
| Hi-Temp 316 Stainless Unit Only: Includes only the unit itself, no accessories. | ||
Diameter
|
Model No.
|
Material |
1¼"
|
Hi-Temp Stainless (700F) |
|
2½""
|
Hi-Temp Stainless (700F) |
|
| Hi-Temp 316 Stainless Standard Kit: Includes: Hi-Temp Stainless Steel (Type 316) Adjustable Air Amplifier, and NPT Auto Drain Filter. | ||
Diameter
|
Model No.
|
Material |
1¼"
|
Hi-Temp Stainless (700F) |
|
2½"
|
Hi-Temp Stainless (700F) |
|
| Hi-Temp 316 Stainless Deluxe Kit: Includes: Hi-Temp SS (Type 316) Adjustable Air Amplifier, NPT Auto Drain Filter, Pressure Regulator, & Mouting Bracket. | ||
Diameter
|
Model No.
|
Material |
1¼"
|
Hi-Temp Stainless (700F) |
|
2½"
|
Hi-Temp Stainless (700F) |
|
Hi-Temp Adjustable Air Amplifier - Specifications
Diameter
|
Model No.
|
Material |
Throat Diameter
|
Amplification Ratio |
1¼"
|
787.SAM114HS |
316 Stainless - 700°F |
1.01" |
16:1 |
2½"
|
787.SAM212HS
|
316 Stainless - 700°F |
2.03" |
25:1 |
Compressed Air Consumption - Tested with .002" (.05mm) Gap
| 1-1/4" | 2" | 2-1/2" | 4" | |||||
PRESSURE SUPPLY
|
SCFM
|
SLPM |
SCFM
|
SLPM | SCFM | SLPM | SCFM | SLPM |
20 PSIG (1.4 Bar)
|
4.5 |
127 |
8.0 |
226 |
12.0 | 340 | 18.0 | 509 |
40 PSIG (2.8 Bar)
|
7.0
|
198 |
12.0 |
340 |
19.5 | 552 | 28.0 | 792 |
60 PSIG (4.1 Bar)
|
10.0
|
283 |
16.0 |
453 |
24.5 | 693 | 37.0 | 1047 |
80 PSIG (5.5 Bar)
|
13.0
|
367 |
22.0 |
623 |
29.0 | 821 | 52.0 | 1472 |
| 100 PSIG (6.4 Bar) | 14.5 | 410 | 25.5 | 722 | 35.0 | 991 | 60.0 | 1698 |
120 PSIG (8.4 Bar)
|
17.0 |
481 |
30.5 |
863 |
42.0 | 1189 | 66.5 | 1882 |
Adjustable Air Amplifier: DUCTING
Both the vacuum intake (inlet) and discharge ends can be ducted for fume conveying and light material applications. It is important that care is taken to avoid restrictions that could cause suction resistance or back pressure that will reduce the performance levels.
Adjustable Air Amplifier Air Flow Pattern
MODEL NUMBER
|
A
|
B |
C
|
D |
787.SAM114A, 787.SAM114S, 787.SAM114HS
|
2" (51mm) |
3" (76mm) |
4.8" (122mm) |
6.3" (160mm) |
787.SAM200A, 787.SAM200S, 787.SAM200HS
|
2.5" (64mm)
|
3.4" (86mm) |
5.1" (130mm) |
7.2" (183mm) |
787.SAM212A, 787.SAM212S, 787.SAM212HS
|
3.1" (79mm)
|
4" (102mm) |
5.5" (140mm) |
7.7" (196mm) |
787.SAM400A, 787.SAM400S, 787.SAM400HS
|
5" (127mm)
|
5.6" (142mm) |
7" (178mm) |
8.8" (224mm) |
1. Can my compressed air pressure be increased with an Air Amplifier?
No. The Adjustable Air Amplifier only amplifies volume, not pressure. The outlet pressures are well below 1 PSIG. The Air Amplifiers takes energy from a small volume of compressed air to produce its high velocity, high volume, low pressure output airflow. 2. How do I mount the Air Amplifier?
A rigid air pipe is the optimal way to mount the Air Amplifier. The rigid air pipe will easily hold up to the very large air flow created. 3. Can I connect the cold end of a Vortex Tube to an Air Amplifier?
No. The Air Amplifier would restrict the air flow of the Vortex Tube to the point where back-pressure would limit the cooling capacity of the Vortex Tube. The cold end of the Vortex Tube should not be subjected to a backpressure in excess of 5 PSIG.
| Automotive: |
| • Remove coolant, water, dust, and scrap in manufacturing operations. Cool enamel in parts manufacturing, body shops, or assembly lines. |
| Bottling: |
| • Blow off water, dust, dirt, etc., from tops of bottles/cans prior to labeling. |
| Food: |
| • Eliminate water from fruits, vegetables, or even packaging. |
| Manufacturing: |
| • Exhaust fumes & dust, Part ejection, liquid blow off from all types of parts, convey away waste, Replace open air lines, and replace fans. |
| Paper/Plastic: |
| • Sawdust, scrap blow off, trim removal in converting applications. |
| Pharmaceutical: |
| • Blast off moisture from bottles prior to packaging, cooling to set ink on packaging, convey light material. |
| Tobacco: |
| • Convey tobacco, move light materials, and extract unfilled cigarettes as they pass. |
ADVANTAGES |
| • Low Cost |
| • Greatly reduced noise (Below 80db) |
| • Easy to control flow/velocity |
| • Adjustable without the use of tools |
| • Zero maintenance |
| • No electricity, moving parts, or explosion hazard |
| • Adaptable to many applications |
| TOP VIEW | SIDE VIEW | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
General Accessories
| Filter Separators: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
|
||
|
||
|
||
| Pressure Regulators: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
|
||
|
||
| Oil Removal Filters: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
| Valves: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
|
||
| Compressed Air Hose: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
|
||
|
||
|
||