TOOL COOLERS
- Information
- Specifications
- FAQs
- How It Works
- Applications
- Dimensions
- Accessories
- Installation & Maintenance
- Streamtek index page
STREAMTEK Tool Cooling System:
STREAMTEK's Tool Cooler is a new solution to a very old problem. The Tool Cooler systems produces a flow of clean cold air flow at approximately 50º F (28º C) below compressed air supply temperature. The unit is muffled for quiet operation. It will remove heat to prolong your tool life and increase productivity on machining operations when liquid coolants simply cannot be used. In addition, there are no moving parts to wear out.
The STREAMTEK Tool Cooler often replaces costly mist coolants and improves the output and quality of all types of drying machining operations from plastics to metals. Made of heavy-gauge stainless steel, they are precision-machined, assembled and test under strict quality control. They will never rust or pit when exposed to water, coolants, or other corrosive materials.
 |
||||||||||||||||
Tool Cooler System - Operation:
STREAMTEK's Tool Cooling System uses a simple vortex tube to produce cold air at one end. The hot air is exhausted as waste at the muffled hot end of the Tool Cooler. As the cold exists through the flixible adjustable hose, it's muffled. The adjustable hose is used to direct the air where cooling is needed.
To allow for easy mounting and portability the magnetic base is used to mount the Tool Cooler to the machine.
| Tool Cooler Specifications | |||||
Model No. |
Pressure Supply |
Air Consumption |
PSIG | ||
| PSIG | BAR | SCFM | SLPM | dBA | |
100
|
6.9
|
15
|
425
|
72
|
|
100
|
6.9
|
30
|
850
|
83
|
|
| Tool Cooler Systems | |
Model No. |
Description |
Regular Tool Cooler Only, 15 SCFM
|
|
Regular Tool Cooler System, 15 SCFM - (1) Cold Outlet
Includes: Tool Cooler, Single Point Hose Kit, and Filter. |
|
Regular Tool Cooler System, 15 SCFM - (2) Cold Outlets
Includes: Tool Cooler, Dual Point Hose Kit, and Filter. |
|
Advanced Tool Cooler Only, 30 SCFM
|
|
Advanced Tool Cooler System, 30 SCFM - (1) Cold Outlet
Includes: Tool Cooler, Single Point Hose Kit, and Filter. |
|
Advanced Tool Cooler System, 30 SCFM - (2) Cold Outlets
Includes: Tool Cooler, Dual Point Hose Kit, and Filter. |
|
1. What is the difference between the Regular and Advanced Tool Coolers?
The Advanced Tool Cooler has twice the cooling capacity of the Regular Tool Cooler, cooling the part in less time. Both coolers are constructed of Stainless Steel (Type 303) and are available with dual-point or single-point flexible hose kits. 2. What's the difference between the Vortex Tube and Tool Cooler?
The Tool Cooler has a fixed maximum flow capacity which cannot be adjusted. The control valve on the Vortex Tube within the Tool Cooler has been replaced with a preset orifice which allows the Vortex Tube to produce the absolute highest cooling capacity available. In addition, the STREAMTEK Tool Cooler also incorporates a cold end muffler, allows for a flexible hose kit, and includes a magnetic base for quick n' easy mounting.
|
|
Tool Coolers Accessories
| Tool Coolers: | ||
Model No.
|
Description |
|
|
||
|
||
General Accessories
| Filter Separators: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
|
||
|
||
|
||
| Pressure Regulators: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
|
||
|
||
| Oil Removal Filters: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
| Valves: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
|
||
| Compressed Air Hose: | ||
Model No.
|
Description |
|
|
||
|
||
|
||
|
||
|
||
|
||