DCFN-3000PRO

DCFN-3000PRO Coating Thickness Gauge

Measures Coatings On both Ferrous & Non-Ferrous Metals Measuring Range: 0-60 mils (0-1500um) The new Check-Line 3000PRO coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for: paint and electroplated coatings on iron and steel paint and anodising coatings on non-ferrous metals and on austenitic stainless steels The recording and further processing of stored measurement data are just as easy to carry out as the measurement itself. The file names can be alphanumerically assigned via an input panel and managed in a data memory.

 Features

Automatic identification of the substrate  Calibration-free measurements (calibration only in exceptional cases)  Mobile and stationary operation with only one gauge  Highly wear-resistant measuring poles made of carbide metal  Special probes for unusual measurement tasks  Precise measurements on different geometries thanks to simple calibration methods  Safe use even for special applications such as sand-blasted surfaces, small parts and curved surfaces  Scan mode for the quick recognition of coating thickness variations on large surfaces, including display of minimum and maximum readings  Display backlight for bad ambient lighting conditions

Online statistics with all statistical parameters  Easy to operate, well-known from mobile phones  Intuitive menu guidance via dialog with the user  Free choice of language – German, English, French  Extensive data memory for the management of different measurement series  Alphanumerical file names can be individually stored for every measurement task  Infrared interface for wireless data transfer to printer and PC  No additional data transfer software required thanks to the use of Windows® standard application (HyperTerminal)

 Complete Kit

The DCFN-3000PRO is supplied as a complete that includes the gauge, probe, manufacturers calibration certificate, a ferrous and non-ferrous zero plate, 2 calibration foils, 2 AA batteries, soft pouch, instruction manual all in a rugged plastic carrying case.

 Specifications

Measuring principle:

Magnetic induction method (F-version); Eddy current method (N-version)

Measuring range:

0 ... 1500 µm/60 mils (selectable units µm/mils)

Tolerance:

± (0.7 µm/0.04 mils + 1% of reading)

Resolution:

0.1 µm/0.004 mils or < 0.2 % of reading

Display:

4-digit display (digit height 10 mm/0.4”) and 32 alphanumerical characters; switchable backlight

Minimum measurement area:

5 mm x 5mm/0.2” x 0.2”

Minimum curvature radius:

convex 2mm/0.08”; concave 5mm/0.2”

Minimum substrate thickness:

0.2mm/8 mils (for F-versions); 50 µm/2 mils (for N-versions)

Calibration methods:

- Factory calibration: no calibration required for standard applications - Zeroing (1-point calibration): measurements on small geometries - Zeroing and foil calibration (2-point calibration): increased measuring accuracy - Two-foil calibration: especially for rough, sand-blasted surfaces - CTC: calibration on coated object if zeroing is not possible - Zero offset: addition/subtraction of a constant value to/from the reading

Limit values:

Selectable; optical and acoustic signal if limit value is exceeded

Scan mode:

For continuous measurements; for the quick recognition of coating thickness variations; with permanent display of minimum and maximum reading

Statistics:

Single-value statistics: n, avarage x, s, kvar, min, max, cp, cpk from max. 10,000 readings Block-value statistics: n, avarage x , avarage s, avarage kvar , min, max, cp, cpk; block size 3 to 100 readings

Data memory:

10,000 readings in max. 500 selectable files; alphanumerical file names; stored readings and statistical values individually recallable

Interfaces:

Infrared and serial RS232 interface

Language:

Operator prompting and documentation in German, English, French (optional other languages)

Operating temperature:

0 °C to 50 °C/32 °F to 122 °F (storage temperature - 20 °C to +60 °C/-4 °F to 140 °F)

Surface temperature:

-15 °C to 60 °C/5 °F to 140 °F (briefly above 60 °C/140 °F up to 150 °C/302 °F)

Power supply:

2 x round cell (AA) 1.5 V up to 60 hours of operating time

Housing/keypad:

Protection class IP52 (protection against dust and dripping water)

Dimensions:

Gauge: 140 mm x 62 mm x 30mm/5.6” x 2.5” x 1.2” (HxWxD) Probe: dia. 14 mm x 83mm/dia. 0.56” x 3.3”

Weight:

approx. 200 g/7 oz (gauge including batteries and probe)

Standards:

DIN EN ISO, ASTM, BS

Item	Description
CHE.DCFN-3000PRO	DCFN-3000PRO Complete Kit
CHE.DCFN-3000PRO-FN90	DCFN-3000PRO-FN90 Complete Kit