Through Paint Ultrasonic
Wall Thickness Gauge
TI-25M-MMX
Measuring Range:
Pulse-Echo
Mode (Pit & Flaw Detection) measures from 0.025
to 19.999 inches (0.63 to 500 millimeters).
Echo-Echo
Mode (Through Paint &
Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). |
The new CHECK-LINE TI-25M-MMX
Wall Thickness Gauge accurately measures wall thickness and the
extent of corrosion of all metals, ceramics, glass and
most rigid plastics - from only one side!
The TI-25M-MMX can be used in
a Single Thickness Reading mode or in a Scan
mode , where the probe is dragged over a large measuring area.
The minimum thickness reading recorded during the "scan"
will be displayed.
The TI-25M-MMX probe is waterproof
and can be submerged in water. The gauge is impact-resistant
and environmentally sealed to provide trouble-free operation
under the toughest field conditions. |
 |
|
 Ability to measure
through paint and eliminate coatings
Resolution of 0.001
inch (0.01 mm)
Large, backlit
LCD display retains last reading
Simple operator
controls virtually eliminate training |
Special-purpose
probes are offered for a variety of applications
Switch-selected
units for inches or mm
For underwater surveying, probe cable lengths
up to 50 feet are optionally available
CE Certified |
|
Range |
Pulse-Echo Mode (Pit
& Flaw Detection) measures from 0.025 to 19.999 inches (0.63
to 500 millimeters).
Echo-Echo
Mode (Through Paint &
Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). |
|
Resolution |
.001" (0.01 mm) |
|
Display |
4½ - Digit,
0.5" Backlit LCD |
|
Velocity Range |
0.0492 to .3937 in./µs. (1250
to 10,000 meters/second) |
|
Probe |
5 MHz, 0.25" Diameter (6.35
mm) with rubber molded grip. |
|
Probe Wearface |
PEEK (Polyethlethylketone) |
|
Cable |
4 ft. (1.2 m) waterproof cable with
non-polarized, quick-disconnect connectors. Optional lengths
up to 50 ft. (15 m). |
|
Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C)
Material:
--ll0 to 200° F (-20
to 100° C)
Special high temperature probes are optionally available. |
|
Battery Type |
Two AA batteries |
|
Battery Life |
200 hours |
|
Weight |
7 ounces (196 g) |
|
Size |
2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm) |
|
Accessories Included |
Probe/cable assembly. 4 oz. bottle
of coupling fluid, NIST Calibration Certificate, 2 AA batteries,
operating instructions, hard-plastic carrying case. |
|
Warranty |
Gauge: 5 years
Probe: 90 days |
|
Minimum radius for convex surfaces |
0.350" (12.7 MM) |
|
Minimum radius for concave surfaces |
6" (63.5 mm) |
|
Probe surface can be rounded to
allow it to lie flat in small pipes to 1" |
|
Minimum headroom |
1" (25.0 mm) |
|
Minimum sample diameter |
0.150" (3.8 mm) |
The TI-25M-MMX is supplied as a complete kit with the gauge,
probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration
Certificate, and Operating Instruction Manual - all in a foam-fitted
carrying case. |
|