link to Home Page Logo, Link to Home Page Newman Tools Inc.     Tel 1-800-465-1384     Fax 1-800-605-2442
..."IN STOCK"... vast selection, over 30,000 different items including,
"hard-to-find/special sizes"
        Fast Jump on the Newman Tools' site

30,000 items In Stock... hard to find / special sizes

NEOLUBE Pipe Thread Sealant No.100
Material Safety Data Sheet


 

                                      MATERIAL SAFETY DATA SHEET

 

                                      1.  PRODUCT IDENTIFICATION   

Product Name:        Neolube Pipe Thread Sealant

Item Number:         No. 100

Product Type:        Anaerobic Sealant

 

2.  COMPOSITION/INFORMATION ON INGREDIENTS

HAZARDOUS COMPONENTS       CAS#         PERCENT       ACGIH TLV     OSHA PEL      OTHER

Bisphenol A Fumarate Resin               39382-25-7    30-60         None          None          None

Polyglycol Dimethacrylate                25852-47-5    10-30         None          None          None

Polyglycol Laurate                       9004-81-3     10-30         None          None          None

Polyethylene Glycol Monococoate          61791-29-5    10-30         None          None          None

Silica, amorphous, fumed crystalline-free       112945-52-5   1-5           6 mg/m3 TWA   10 mg/m3 TWA  3 mg/m3 TWA

respirable dust

Titanium dioxide                         13463-67-7    1-5           10 mg/m3 TWA  15 mg/m3 TWA  None

total dust

 

                                      3.  HAZARDS IDENTIFICATION   

                                                  

 

                                         EMERGENCY OVERVIEW

 

HMIS:

 

Physical State:      Paste                                    Health:                    2*

Color:        White                                    Flammability:        1

Odor:         Mild                                     Physical Hazard:     1

Personal Protection: See Section 8

WARNING:      MAY CAUSE ALLERGIC SKIN REACTION.

MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION.

MAY BE HARMFUL IF SWALLOWED.

Relevant routes of exposure:      Skin, Inhalation, Eyes

 

Potential Health Effects

Inhalation:          May cause respiratory tract irritation.

Skin Contact:        May cause skin irritation.  May cause allergic skin reaction.

Eye Contact:         May cause irritation.

Ingestion:           May be harmful if swallowed.

Existing conditions aggravated by exposure:     Eye, skin and respiratory disorders.

 

                       See Section 11 for additional toxicological information.

 

                                        4.  FIRST AID MEASURES

Inhalation:   Remove to fresh air.  If symptoms develop and persist, get medical attention.

Skin Contact: Wash with soap and water.  Remove contaminated clothing and shoes.  Wash clothing before reuse.  Get medical attention if symptoms occur.

Eye Contact:  Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time.  Get medical attention.

Ingestion:    Do not induce vomiting.  Keep individual calm.  Obtain medical attention.

 

                                      5.  FIRE FIGHTING MEASURES   

Flash Point:                      Greater than 93°C (200°F) Tagliabue Closed Cup

Autoignition Temperature:                Not Available

Flammable/Explosive Limits- Lower %:     Not Available

Flammable/Explosive Limits- Upper %:     Not Available

Extinguishing Media:              Foam, dry chemical or carbon dioxide .

Special Fire Fighting Procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out-gear.

Unusual Fire or Explosion Hazards None

Hazardous Combustion Products:    Oxides of carbon.  Oxides of sulfur.  Oxides of nitrogen.  Irritating organic vapors.

 

                                    6.  ACCIDENTAL RELEASE MEASURES 

Environmental Precautions: Prevent product from entering drains or open waters.

Clean-Up Methods:          Soak up with inert absorbent.  Store in a partly filled, closed container until disposal.

 

                                       7.  HANDLING AND STORAGE    

Handling:            Avoid contact with eyes, skin and clothing.  Avoid breathing vapor and mist.  Wash thoroughly after handling.  Use only with adequate ventilation.

Storage:                    For safe storage, store at or below 38°C (100°F).  Keep in a cool, well ventilated area away from heat, sparks and open flame.  Keep container tightly closed until ready for use.

Incompatible Products:     Refer to Section 10.

 

         For information on product shelf life contact Huron Industries, Inc. at 810-984-4213

 

                              8.  EXPOSURE CONTROLS / PERSONAL PROTECTION 

Engineering Controls:      No specific ventilation requirements noted, but forced ventilation may still be required if concentrations exceed occupational exposure limits.

Respiratory Protection:    Use NIOSH approved respirator if there is potential to exceed exposure limit(s).

Skin Protection:           Use impermeable gloves and protective clothing as necessary to prevent skin contact.

Eye/Face Protection: Safety goggles or safety glasses with side shields.

See Section 2 for exposure limits.

 


                                 9.  PHYSICAL AND CHEMICAL PROPERTIES     

Physical State:            Paste                      Color:               White

Odor:                Mild                       Vapor Pressure:      Less than 5 mm Hg at 27°C (80°F)  

pH:                  Not Applicable                    Boiling Point/Range: Greater than 149°C (300°F)

Melting Point/Range: Not Available              Specific Gravity:    1.08

Vapor Density:             Not Available              Evaporation Rate:    Not Available

Solubility in Water: Slight                     VOC Content:         8.4%; 90.7 grams/liter (EPA Method 24)

Partition Coefficient (n-octanol/water): Not Available

 

                                     10.  STABILITY AND REACTIVITY  

Stability:                        Stable

Hazardous Polymerization:         Will Not Occur.

Hazardous Decomposition Products: Oxides of carbon, Oxides of sulfur, Oxides of nitrogen. Irritating organic vapors. Phenols.

Incompatibility:                         Strong acids and oxidizing agents.  Strong reducing agents.  Strong alkalis.  Cooper. Iron. Rust. Aluminum. Zinc. Oxygen scavengers.

Conditions to Avoid:              See AHandling and Storage@ (Section 7) and AIncompatibility@ (Section 10).

                                            

                                    11.  TOXICOLOGICAL INFORMATION 

Product Toxicity Data:     Acute LD50 (oral): Greater than 5000 mg/kg(rat). (estimated). Acute LD50 (dermal): Greater than 2000 mg/kg (rabbit). (estimated).

                                           Carcinogen Status

 

Hazardous Components

 

NTP Carcinogen

 

IARC Carcinogen

 

OSHA Carcinogen

 

Bisphenol A Fumarate Resin

 

No

 

No

 

No

 

Polyglycol Dimethacrylate

 

No

 

No

 

No

 

Polyglycol Laurate

 

No

 

No

 

No

 

Polyethylene Glycol Monococoate

 

No

 

No

 

No

 

Silica, amorphous, fumed, crystilline-free

 

No

 

No

 

No

 

Titanium dioxide

 

No

 

No

 

No

                    Literature Referenced Target Organ & Other Health Effects

 

Hazardous Components

 

Health Effects/Target Organs

 

Bisphenol A Fumarate Resin

 

Allergen, Irritant

 

Polyglycol Dimethacrylate

 

Allergen, Irritant

 

Polyglycol Laurate

 

Allergen, Irritant

 

Polyethylene Glycol Monococoate

 

No Data

 

Silica, amorphous, fumed, crystilline-free

 

Nuisance dust

 

Titanium dioxide

 

Irritant, Respiratory

 

                                      12.  ECOLOGICAL INFORMATION   

Ecological Information:    Not Available

 

                                     13.  DISPOSAL CONSIDERATIONS

                           Information provided is for unused product only.

Recommended Method of Disposal:   Dispose of according to Federal, State and local governmental regulations.

EPA Hazardous Waste Number:       Not a RCRA Hazardous Waste.

 

                                      14.  TRANSPORT INFORMATION

U.S. Dept. of Transportation Ground (49 CFR)/International Air Transportation (ICAO/IATA)/Water Transportation (IMO/IMDG):

 

Proper Shipping Name:             Unrestricted               Hazard Class or Division:  None

Identification Number:            None                       Packing Group:                    None

Marine Pollutant:          None

 

                                      15.  REGULATORY INFORMATION   

United States Regulatory Information

TSCA 8 (b) Inventory Status: All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory.

TSCA 12 (b) Export Notification:  4-Methoxphenol (150-76-5)

CERCLA/SARA Section 302 EHS: None above reporting de minimus.

CERCLA/SARA Section 311/312: Immediate Health Hazard, Delayed Health Hazard.

CERCLA/SARA 313:             This product contains the following toxic chemicals subject to the reporting requirement of section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 (40 CFR 372).  Cumene hydroperoxide (CAS# 80-15-9).  Acrylic acid (CAS# 79-10-7).

California Proposition 65:   This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Canada Regulatory Information

CEPA DSL/NDSL Status:             All components are listed on or are exempt from listing on the Domestic Substances List.

WHMIS Hazard Class:          D.2.A, D.2.B

 

                                        16.  OTHER INFORMATION     

Prepared By:         Debra Sullivan

Date:                March 9, 2005                 

Company:             Huron Industries, Inc.

Address:             P.O. Box 610104, Port Huron, MI 48061-0104

Emergency Response:  800-535-5053 or 1-352-323-3500




Newman Tools Logo




Newman Tools Inc.
185 Iber Road
Stittsville, Ottawa, Ontario, Canada K2S 1E7
Phone: 1-613-836- 6776 or 1-800-465-1384
Fax: 1-613 -836 -9070 or 1-800-605-2442
 
 
Newman Tools Inc.
( formally situated at 3422 Notre Dame St. W
Montreal, Quebec, Canada H4C 1P2 )
Phone: 1-800-465-1384
Fax: 1-800-605-2442

Newman Tools Inc.
151 New Park Avenue
Hartford, CT 06106, USA
Phone: 1-800-465-1384
Fax: 1-800-605-2442


mailto:info@newmantools.com



FastCounter by LinkExchange

Please send comments, questions, email tomailto:tom@newmantools.com

return to Newman Tools Home Page.


Go to ... Home Page  | Brand Name index  | Product list  | Technical info  | Price list  | Monthly specials $$$$  | Jokes  | Latest page additions  | Contact Information  | Email the Boss


servicing the Canadian provinces of Newfoundland, Nova Scotia, New Brunswick, Prince Edward Island, Quebec, Ontario, Manitoba, Saskatchewan, Alberta ,British Columbia

and the states of Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin,Wyoming



September 2005
Newman Tools Inc.