DE-STA-CO™ Toggle Clamps

DE-STA-CO™ Toggle Clamps

• POWER CLAMPS

PNEUMATIC SWING CYLINDERS
SERIES 8000, 8100, 8200, 8300 Quick, Clean & Economical Ideal for installations where hydraulic power is not suitable, these pneumatic power clamps from De-Sta-Co have all the same quick-acting advantages and can produce up to 160 lbs. clamping force from shop line air pressure (see chart). These double acting clamps are red anodized aluminum with either a threaded body that permits three mounting options, or a block-style mounting body. Intended for quick clamping in secondary manufacturing operations on metallic or non-metallic products, these clamps offer a combination of features that makes them uniquely adaptable to such applications. - 90° swing of clamping arm minimizes obstruction in the workspace and makes loading or unloading of parts easy. - 1/2" clamping stroke (downward arm travel) allows wide variation in part size. The clamp adjusts automatically on every cycle. - Quick swing-and-clamp movement reduces cycle times in your operation. - Pneumatic operation is economical and clean, and allows precise control and monitoring of the clamping force. - Multiple mounting options allow the clamp to be adapted to the fixture for the best use of space and to minimize installation time. - Clamping force is adjustable across a wide range: 20 lbs. to 160 lbs. Clamp exerts just the force your operation requires ... without deforming delicate parts. - Broad operating temperature range of -40 degrees F to 250° F allows installations in extreme environments. - Multiple arm options including standard arms, long arms, "T" arms and "blank" arms for user adaptation.	Models 8000, 8200 Models 8100, 8300
HOLD DOWN ACTION A pneumatic (or hydraulic) cylinder provides the activating force. The rugged construction provides repetitive production operations but at a cost low enough for short run jobs. These clamps also have the desirable safety feature of being mechanically locked (when fully closed) so that even a total loss of pressure will not cause them to cycle. All 800 Series clamps are self-contained. They simply need to be mounted and attached to air or hydraulic lines. Special High Temperature Seals (H/T Option) These optional seals withstand temperatures to 400° continuous service. Special Magnetic Ring (MR) Cylinder Option If there is a need to sense the open or closed position of the cylinder, we can provide our cylinders with magnetic rings. Then, by adding a tie-rod mounted reed switch, you can sense the position of the cylinder.
MODEL 812 Smallest of the hold-down models, this miniature clamp is the air-powered version of Model 201. The 10-32 spindle (201208) is adjustable for height and location along the bar. The cylinder has built in speed controls. Clamp and base are stainless steel. Bar opens 90°	EDP# 58120 Model 812 Hose and fittings kit P/N 812816
MODEL 802 The 802 provides 200 lbs. holding capacity in a package less than 7" long. The double acting power cylinder has built-in speed control (restriction) and needs only to be hooked up to a controlled air or hydraulic power source. Hold down bar opens 95° to facilitate easy part loading and unloading. Includes 1/4-20 neoprene spindle assembly (202208). Air powered version of model 202.	EDP# 58020 Model 802
MODEL 807-L, 807-UL Two versions are available. Model 807-L with solid steel hold-down bar and Model 807-UL (illustrated) with U-bar. The 807-L is furnished with a separate bolt retainer (207105) which can be welded onto the hold-down bar. The 807-UL is furnished with flanged washers (507107). Bar opens 92°. Accommodates any 5/16-18 spindle assembly (not supplied). The pneumatic version of model 207. EDP# 58071, Model 807-L	EDP# 58070 Model 807-UL
MODEL 810-S, 810-U Similar to Series 807 but larger and higher capacity. Model 810-S with solid bar and Model 810-U with U-bar. Bar opens 95°. Accommodates any 3/8-16 spindle assembly (not supplied). The air-powered version of model 20. EDP# 58101, Model 810-S	EDP# 58100 Model 810-U
MODEL 847-S, 847-U The 847-S (solid bar) and 847-U have the patented bar guide feature. This provides additional side support to the hold-down bar and allows a take-up adjustment to compensate for misalignment or wear. Other features are similar to preceding models. The hold-down bar opens 95°. Accommodates any 1/2-13 spindle assembly (not included). This is the air-powered version of model 247. EDP# 58471, Model 847-S	EDP# 58470 Model 847-U
MODEL 849 A cam mechanism in the linkage of this unique clamp will accommodate up to a 1/2" part size variation. Once set to the nominal (or average) part size, parts up to 1/4" larger or 1/4" smaller can be clamped without changing the setting. Bar opens 90°. Clamp bar can be machined or altered to suit the application.	EDP# 58490 Model 849
MODEL 858 The pneumatic version of model 568, this heavy-duty model uses forged alloy steel links and steel components machined to close tolerances. Base is a 1/2" thick steel plate. All pivot points have hardened bushings fitted with hardened steel pivot pins. The 1 " x 1-3/8" steel hold-down bar may be cut, drilled and tapped or welded to adapt to application. Bar opens 92°.	EDP# 58580 Model 858
MODELS 817, 827, 868 Many times it is desirable to use a right angle model where space dictates. Applications such as rotary indexing tables and injection molding operations are examples. All three models can be mounted on the side of the fixture and the models 817 and 827 can also be top mounted. Model 817 is the pneumatic version of model 317, and it accommodates any 5/16-18 spindle assembly (not included). Model 827 can accept any 3/8-16 spindle accessory (not included). Model Bar Opens 817 90° 827 88° 868 90°	EDP# 58270 Model 827-U EDP# 58170 Model 817-U "U" bar EDP# 58680 Model 868
STRAIGHT LINE (PLUNGER) ACTION
MODEL 816 This miniature straight-line clamp is the air-powered version of Model 601. The miniature double-acting cylinder has built in speed controls for smooth operation. Model 816 is ideal for applications calling for small size and remote or automated control. Supplied with 8-32 spindle assembly (105203) for end-of-plunger adjustment.	EDP# 58160 Model 816
MODEL 803 This compact plunger action clamp is less than 10" long but provides a holding capacity of up to 600 lbs. The 7/16" diameter plunger extends 3/4" to a locked position. The end of the plunger is drilled and tapped for a 5/16-18 spindle (not supplied).	EDP# 58030 Model 803
MODEL 830, 830-10 The 5/8" diameter plunger travels forward 1-1/4" from an open to a closed and locked position. The Model 830 is also available in an alternate configuration as Model 830-10 which locks in the retracted position only and has a plunger travel of 3/4". Plunger is drilled and tapped to accept a 3/8-16 spindle (not supplied) or to receive your custom fixture. EDP# 58301, Model 830-10	EDP# 58300 Model 830
MODEL 850 Largest of the straight-line actions, this model has a full 1" diameter plunger that extends 2" and goes into a mechanical lock. A 3/8" thick steel base provides rigidity and can be welded or bolted in position. Snap ring construction permits easy removal of the plunger without disassembling the entire unit. End of plunger accommodates any 5/8-11 spindle assembly (not supplied).	EDP# 58500 Model 850
HEAVY DUTY TOGGLE LOCK POWER CLAMPS
SERIES 840, 860, 890, 1000 Designed for high production applications, these toggle action pneumatic clamps offer exceptional clamping forces and holding capacities - far greater than other clamps of similar size. And unlike most pneumatic toggle clamps, they do not require greater pressure to open than to close. Of special importance in the design of the Series 840 is the oval cylinder. Because of the extremely narrow profile of these clamps, they can be used in cramped quarters or can be ganged closer together in multiple installations. The even numbered models in these series feature a 180° clamping arm which travels to an over-center locked position parallel (180°) to the clamp centerline. The corresponding odd numbered models have a 90° arm. The angular locked position of both versions is precisely controlled by the hardened steel insert. Clamp arms can be machined, drilled, cut off, or welded to suit the application requirements. Many other versions of these clamps are available with special arms, proximity switch sensors, cushioned cylinders, and other features designed for automated clamping. Please contact the factory for information on the complete, specialized automation clamp line.	EDP# 58910 Model 891 EDP# 58410 Model 841
HEAVY DUTY POWER ROLLER CLAMPS
SERIES 870, 871 Power Arm Clamps These models use a roller and cam principle and provide the following benefits: - Able to clamp work of inconsistent thickness and still maintain a locked condition. - Modular units 2-1/8" square can stack together for minimum distance between clamping points. - Four-way mounting surface for full mounting flexibility. - Built-in pre-stop eliminates need to bottom out cylinder. Gives extra travel to automatically compensate for wear.Also permits arm to be machined accurately relative to mounting surface. - Clamp arms can be altered by welding, drilling or machining to suit the application.	EDP# 58700 Model 870 EDP# 58710 Model 871 Function
HEAVY DUTY,HIGH SPEED, POWER ROLLER CLAMPS
MODELS 880 - 889 Automation Clamps and Die Gages Designed for high speed, heavy duty industrial operations, these units give long life and operational efficiency. The roller and cam principle has proven in use to be capable of millions of cycles with minimum adjustment or maintenance.	EDP# 58810 Model 881 Die Gage
MODELS 800, 1200 Low Profile Pneumatic Retractor Clamps Even the smallest shop can now have rapid power clamping. The De-Sta-Co Low Profile Pneumatic Retractor Clamp operates on ordinary shop line air (properly filtered and lubricated). And the clamp arm completely retracts from the work area, for ease in part loading and unloading. The resulting increase in productivity can reduce your labor costs, too. - Compact size and low profile for mounting in restricted areas. - Uniform clamping force throughout full stroke. - Variable clamping force allowed by regulating input pressure. - Requires no auxiliary power source. - Operates in any position or mounting angle. - Clamping capacities to 1,200 pounds (at 250 psig). - Both models available with extended arm, as Models 800E and 1200E. Here's how it works: 1) Clamp arm retracts fully for loading and unloading ease. 2) Clamp arm moves straight forward and... 3)... pivots down to hold workpiece firmly in position.	EDP# 5800 Model 800