link to Home Page	Newman Tools Inc.     Tel 1-800-465-1384     Fax 1-800-605-2442
	..."IN STOCK"... vast selection, over 30,000 different items including, "hard-to-find/special sizes"		Fast Jump on the Newman Tools' site Go to ... Home Page Brand Name index Product list Technical info Price list Monthly specials $$$$ Jokes Latest page additions Contact Information Email the Boss Eclipse magnets index page

30,000 items In Stock... hard to find / special sizes

Eclipse Permanent Holding Magnets

Ferrite Shallow Pot   |    Ferrite Shallow Holdfast | Ferrite Channel Magnets | Holdfasts | Magnetic Foot | Neo-Hold Bi-pole Gripping Magnets

Ferrite Shallow Pot Magnets
The Eclipse range of Ferrite Shallow Pot Magnets are wide and shallow and thus are ideal for limpet type gripping applications. Each magnet in the range is manufactured using standard M6 thread for building into jigs and fixtures and is fitted with a J bolt.

Catalogue No.				Weight each (kg)	Pull (max) (kg)
E890	46	10.7	M6	0.09	6
E891	56	10.7	M6	0.13	16
E892	66	10.7	M6	0.19	25

Ferrite Shallow Holdfast Magnets
All Ferrite Shallow Holdfast Magnets are fitted with a screw down bolt to facilitate the disengagement of workpieces. Each magnet is manufactured with three pre-threaded holes and standard M6 thread.

Catalogue No.			Fixing stud centres (mm)	No. of holes	Standard	Weight each (kg)	Pull (max) (kg)
E895	66	10.7	46	3	M6	0.27	25
E896	76	12.5	46	3	M6	0.30	33
E897	100	15.0	63	3	M6	0.61	55

Ferrite Channel Magnets
This range of magnets are ideal for use as 'bases' to machine tool accessories and industrial light fittings where temperatures do not exceed 80°c

Magnetic Holdfasts
A range of Pot Magnets for workholding and workhandling where positive grip is required, but not attraction from a distance. Each Holdfast is equipped with a screw down handle because of the exceptionally strong grip of this range of magnets. Magnetic Holdfasts can be used singly or together to make welding and other assembly jigs.

Holes are tapped M8 x 1.25mm pitch except E942 and E938 which have drilled and untapped 8.4mm diameter holes. Magnetic Holdfasts should not be used in applications where temperature exceeds 220°c.

Magnetic Foot
A rectangular block comprising two pot type magnets set into one mild steel housing. The Eclipse Magnetic Foot is ideal for gripping applications.

The mild steel case is suitable for drilling and tapping in most locations. The maximum operating temperature for this product is 220°c.

Neo-Hold Bi-pole Gripping Magnets
Very strong gripping forces are achieved by having 2 poles close together on one face (bi-pole). The Neo-Hold range are manufactured using Neodymium Iron Boron magnetic material which provides concentrated magnetic strength. This makes them ideal for use in situations where space is restricted yet where greater holding power is required. The maximum operating temperature for this range is 100°c.

Catalogue No				Fixing hole sizes	Weight each (kg)	Pull (max) (kg)
NH 025	12.7	11.6	5.5	M5 x 5	0.010	2.0
NH 065	16.0	15.6	5.5	M6 x 5	0.018	5.0
NH 130	22.0	20.0	5.5	M6 x 6	0.040	9.0
NH 240	25.0	25.0	5.5	M6 x 6	0.070	15.0

Back to Top of Page

 link to product table of contents       link to what's "NEW"    

FastCounter by LinkExchange

Please send comments, questions, email to webmaster@newmantools.com

return to Newman Tools Home Page.