Endmills and Shell Mills
picture table
endmills table
shellmill table
| Picture | Series | Picture | Series | |
|---|---|---|---|---|
|
|
|||
|
|
4700 4800 LS |
|||
|
|
5800 | ||
|
5470 5670, LS |
|||
|
6000 6100 LS |
|
6200 | |
|
woodruff cutter |
![]() |
tee-slot, t-slot | |
|
dovetail cutter |
|
inverted dovetail cutter | |
![]() |
corner rounding cutter | |||
|
|
QC3 QC3LS |
| Series | Sizes | Description | |
|---|---|---|---|
| 3800 | 1/8-1-1/2" | M42 cobalt, two & three flute threaded shank endmills (slot drills), standard length | M42 cobalt, 30° right hand spiral, right hand cutting |
| 3800M | 1.5-50mm | M42 cobalt, two & three flute threaded shank endmills (slot drills), standard length | M42 cobalt, 30° right hand spiral, right hand cutting |
| 3900 | 1/8-1" | M42 cobalt, two & three flute threaded shank endmills (slot drills), long series | M42 cobalt, 30° right hand spiral, right hand cutting |
| 4000 | 1/8-2" | M42 cobalt, multi-flute threaded shank endmills, standard length | M42 cobalt, 30° right hand spiral, right hand cutting |
| 4000M | 2.5-50mm | M42 cobalt, multi-flute threaded shank endmills, standard length | M42 cobalt, 30° right hand spiral, right hand cutting |
| 4100 | 1/8-2" | M42 cobalt, multi-flute threaded shank endmills, long series | M42 cobalt, 30° right hand spiral, right hand cutting |
| 4100M | 3-50mm | M42 cobalt, multi-flute threaded shank endmills, long series | M42 cobalt, 30° right hand spiral, right hand cutting |
| 4300 | 1/16-2" | multi-flute threaded shank endmills, standard length | 30° right hand spiral, right hand cutting |
| 4300M | 2.5 to 50mm | multi-flute threaded shank endmills, standard length | 30° right hand spiral, right hand cutting |
| 4400 | 1/16-2" | multi-flute threaded shank endmills, long series | 30° right hand spiral, right hand cutting |
| 4400M | 4-50mm | multi-flute threaded shank endmills, long series | 30° right hand spiral, right hand cutting |
| 4500 | 1/16-2" | two flute threaded shank endmills (slot drills), standard length | 30° right hand spiral, right hand cutting |
| 4500M | 1.5-50mm | two flute threaded shank endmills (slot drills), standard length | 30° right hand spiral, right hand cutting |
| 4600 | 1/16-2" | two flute threaded shank endmills (slot drills), long series | 30° right hand spiral, right hand cutting |
| 4600M | 2-50mm | two flute threaded shank endmills (slot drills), long series | 30° right hand spiral, right hand cutting |
| 4700 | 1/16-1-1/2" | ball nosed two flute threaded shank endmills (slot drills), standard length | 30° right hand spiral, right hand cutting |
| 4800 | 1/16-1-1/2" | ball nosed two flute threaded shank endmills (slot drills), long series | 30° right hand spiral, right hand cutting |
| 5470 | 5/16-2" | M42 cobalt steel, multi-flute threaded shank roughing cutters, standard length |
M42 cobalt steel 25° right hand spiral, right hand cutting |
| 5670 | 5/16-2" | M42 cobalt steel, multi-flute threaded shank roughing cutters, long series |
M42 cobalt steel 25° right hand spiral, right hand cutting |
| EMWR | 1/2-1-1/2 diameter, 1/16 to 3/8 wide | woodruff cutters, threaded shank | right hand cutting |
| EMTS | 1/4" to 1" bolt size | Tee-Slot cutters, threaded shank | right hand cutting |
| EMDT | 1/2 to 1-1/2" | Dovetail cutters 45° , 55° , 60° , screwed shank | right hand cutting |
| EMDTI | 1" to 1-1/2" | Inverted Dovetail cutters 45° , 60° , screwed shank | right hand cutting |
| EMCR | 1/8" to 1/2" radius | Corner rounding cutters, screwed shank | right hand cutting |
| QC3 | 1/16" to 1/4" | 3 flute throwaway cutters, short series 1/4" plain shank | Right hand cutting |
| QC3LS | 1/16" to 1/4" | 3 flute throwaway cutters, long series 1/4" plain shank | Right hand cutting |
| Series | Sizes | Description | |
|---|---|---|---|
| 5270 | 2" to 6" | M42 Cobalt, threaded bore Roughing Shell Mills, standard length |
Right hand cutting, 30° Right hand spiral, 1" dia. bore, 2 start 12 TPI, R.H. Whit form thread |
| 5370 | 2" to 3" | M42 Cobalt, threaded bore Roughing Shell Mills, long series | Right hand cutting, 30° Right hand spiral, 1" dia. bore, 2 start 12 TPI, R.H. Whit form thread |
| 5800 | 2" to 6" | M42 Cobalt, plain bore Roughing Shell Mills, standard length | Right hand cutting, 30° Right hand spiral, plain bore |
| 6000 | 2" to 6" | threaded bore Facing Cutters, standard length | Right hand cutting, 1" dia. bore, 2 start 12 TPI, R.H. Whit form thread |
| 6100 | 2" to 3" | threaded bore Facing Cutters, long series | Right hand cutting, 1" dia. bore, 2 start 12 TPI, R.H. Whit form thread |
| 6200 | 1-7/8" to 3" | threaded bore Two Flute Slot Drills | Right hand cutting, 30° Right hand spiral, 1" dia. bore, 2 start 12 TPI, R.H. Whit form thread |








