Sign up for our Email Newsletter
 

Flexbar Universal Holder/ Positioners

Instant Positioning-Instant Locking
UNIVERSAL HOLDER/POSITIONERS FOR
ALL AGD INDICATORS AND
ELECTRONIC SENSORS (Lug Backs Too!)
 

The heavy duty FLEXBAR is completely flexible; lets you reach over, under, around, instantly and surely. Elimination of the large assortment of rods, swivels, clamps and other hardware necessary to reach and measure in obstructed areas. Cuts set-up time as much as 75% to 90%. FLEXBAR sets and locks with a simple twist of the lever.

  • Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" diameter.
  • Cable and swaged fittings are stainless aircraft and Mil Spec Grade.
  • Locked by Tensioning of Cable, incredible rigidity is achieved by this design.
    (No Movement once locked).
  • Cam Action Locking.

 

Flexible Arm has 14 Balls & Sockets and When Flexed
Can turn a 2 1 /2" Dia. Circle; Above Units support 3 Lb. Payload. Back Oxide Finish.
On/Off Mag Base: 1 5 /8" x 1 7 /8" x 2" High (approx.).
Pushbutton Type.

Replacement Cables for Flexbars:
Model No. FLEX.80060-2, 2 Ball Cable for Flexbar Models 18026-18038, 18051, 18058-18063, 11014
 

VARIETIES OF FLEXBARS

Height

Base Feature

Magnet Pull (lbs)

Model No.

Notes

14"

Fine Adjustor

None

FLEX.18026

Fine Adjustor
No Magnet

15"

Mag Base

65 On/Off

FLEX.18027

No Fine Adjustor

16"

Mag Base with Fine Adjustor

65 On/Off

FLEX.18028

See Picture(Top Left)

13"

5/16-18 Thread

None

FLEX.18030

See Picture (Top Right)

13"

8mm x 1.25 Thread

None

FLEX.18031

See Picture (Top Right)
Flexbar on Disc Mag Base FLEX.34810
Model No. FLEX.18033 Base 3 1/8" dis., 100 lb.pull. With Fine Adjustor Rod
Model No. FLEX.18037 Base 3 1/8" dis., 100 lb.pull. Without Fine Adjustor Rod
Flexbar on V-Bottom Mag Base
Model No. FLEX.18038 Base 2" x 2 1/4" x 2 5/8". With Fine Adjustor Rod.
(Same Flexbar as on Models 18026-18031 but top end has fine adjustor universal-5 1/2" long for easy adjustment in any plane. Total reach 22". On/Off Mag Base with V on Bottom.
Model No. FLEX.18035 Base 2" x 2 1/4" x 2 5/8". Without Fine Adjustor Rod.

 

 

Sign up for our Email Newsletter
For Email Marketing you can trust