link to Home Page Logo, Link to Home Page Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442

..."IN STOCK"... vast selection, over 30,000 different items including,
"hard-to-find/special sizes"
Fast Jump on the Newman Tools' site

link to Machine Safety Guards Menu
download catalogue pages (14.2 Mb)

30,000 items In Stock... hard to find / special sizes

Flexbar Visorguard

Made in U.S.A.

Visorguard

Provides Complete Protection Between Cutting Tool and Operator's Eyes

Down-To-Earth Features!

Flexbar Arm permits setting of Visorguard at the correct height and angle for each setup.
Flip shield up to load part and down for machining.
Special spring-loaded shaft makes shield stay put- no springback.
Wing-shaped shield protects workers at adjacent machines.
Flexbar locks rigid; has stainless air craft grade tension cable.
Can be installed in minutes on CNC mills, conventional milling machines and others.

Dimensions:

Shield Size- 16" wide x 8" high
Flexbar Arm- 10" long

Model No. FLEX.13055 - Visorguard....
Complete with mounting bracket, Flexbar, and all hardware including mounting hole and thumbscrew for attaching coolant system.

Model No. FLEX.13054
Replacement Shield, 16" wide x 8" high

Replacement Cable for Visorguard:
Model No. FLEX.80063-6, Ball & Thread Cable for Visorguard (FLEX.13055)

OPTIONAL SIZES OF VISORGUARD SHIELDS NOW AVAILABLE: See bottom of Page

LONG REACH VISORGUARD™
Made in U.S.A.
For Large Milling Machines (vertical and horizontal)
and Unguarded Machines Including CNC's

Due to Many requests for VISORGUARDS for larger machine tools, we developed Model No. FLEX.13050 Visorguard.

We took a standard Visorguard and made a new body which attaches to a 1" diameter tube 30 inches long. The tube slip fits into our no. FLEX.13068 mounting bracket which is included in the device. The 30 inch tube plus the Flexbar Flexarm length provides 40 inches of reach. the extension tube is retractable in the socket of the mounting bracket so that it can be set up for smaller distances from point of attachment to the ideal setting of the Visorguard shield.

EXTRA-LARGE VISORGUARD™
LEXAN SHIELDS

Now available for use with All Visorguard™ Models (except FLEX.13032). These shields can be used in place of standard 16"W x 8"H shield and attach in seconds.

EXTRA-LARGE VISORGUARD SHIELDS ONLY:

Model No. Width Height

FLEX.13046
FLEX.13073
FLEX.13074 24"
14½"
15" 8"
12"
16"

horz. bar

link to product table of contents link to what's "NEW" link to price list

Newman Tools Logo

Newman Tools Inc.
185 Iber Road
Stittsville, Ottawa, Ontario, Canada K2S 1E7
Phone: 1-613-836- 6776 or 1-800-465-1384
Fax: 1-613 -836 -9070 or 1-800-605-2442

Newman Tools Inc.
151 New Park Avenue
Hartford, CT 06106, USA
Phone: 1-800-465-1384
Fax: 1-800-605-2442

Email: info@newmantools.com

Please send comments, questions, email to tom@newmantools.com ( this email will be returned advising you to resend the email to the following email address )

spamfilter "at" newmantools "dot" com. This notation is to prevent the robots from harvesting this email address.

return to Newman Tools Home Page.

servicing the Canadian provinces of Newfoundland, Nova Scotia, New Brunswick, Prince Edward Island, Quebec, Ontario, Manitoba, Saskatchewan, Alberta ,British Columbia

and the states of Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin,Wyoming

updated December 2007, September 2001
Newman Tools Inc.