• For hard to reach screws. The HJJ screw-holder grips the screw head with twin bits in one quick and easy step.
  
  
• To grip screw, place bit in screw recess and push. Then simply maneuver the screw into position. The HJJ screw-holder won't release the screw until the threads take hold and it is pulled free.
  
  
• After use, tap release rod at end of screw-holder to reset for next screw.
  
  
• The HJJ screw-holder is just as efficient for REMOVING screws from difficult spots. Press screw-holder lightly into screw recess, and turn making screw push screw-holder out.

For Slotted Screws - Round Brass Handles

	Part Number	Length	Blade Width	Blade Thickness	Handle Diameter	Recommended for Screw sizes
	HJJ.3-10	10"	3/16"	1/32"	1/4"	Nos. 6,8,10,12, and 1/4" Screws
	HJJ.3-8	8"
	HJJ.3-6	6"
	HJJ.3-3	3"
	HJJ.4-8	8"	9/64"	.022"	3/16"	Nos. 3,4 and 5 screws
	HJJ.4-6	6"
	HJJ.4-3	3"
	HJJ.5-8	8"	.102"	.018"	3/16"	Nos. 0,1,and 2 screws
	HJJ.5-6	6"
	HJJ.5-3	3"

For Slotted Screws - Hex Vinyl Handles

	Part Number	Length	Blade Width	Blade Thickness	Handle Size	Recommended for Screw sizes
	HJJ.3E-10	10"	3/16"	1/32"	5/16" hex	Nos. 6,8,10,12, and 1/4" Screws
	HJJ.3E-8	8"
	HJJ.3E-6	6"
	HJJ.3E-3	3"
	HJJ.4E-8	8"	9/64"	.022"	1/4" hex	Nos. 3,4 and 5 screws
	HJJ.4E-6	6"
	HJJ.4E-3	3"
	HJJ.5E-8	8"	.102"	.018"	1/4" hex	Nos. 0,1,and 2 screws
	HJJ.5E-6	6"
	HJJ.5E-3	3"

For Types II and IA Cross-Shaped Recess Screws* and small-diameter slotted screws
Round Brass Handles

	Part Number	Length	Blade Width	Blade Thickness	Handle Diameter	Recommended for Screw sizes
	HJJ.3X-10	10"	1/16"	1/32"	1/4"	Nos. 6,8,10,12, and 1/4" Screws
	HJJ.3X-8	8"
	HJJ.3X-6	6"
	HJJ.3X-3	3"
	HJJ.4X-8	8"	3/64"	.022"	3/16"	Nos. 3,4 and 5 screws
	HJJ.4X-6	6"
	HJJ.4X-3	3"
	HJJ.5X-8	8"	1/32"	.018"	3/16"	Nos. 0,1,and 2 screws
	HJJ.5X-6	6"
	HJJ.5X-3	3"

*Recommended for Reed & Prince FREARSON (Type II) and for Phillips POZIDRIVE® (type 1A). Not recommended for Type I cross-shaped recess screws ( the ordinary Phillips screws).

For Types II and IA Cross-Shaped Recess Screws* and small-diameter slotted screws
Hex Vinyl Handles

	Part Number	Length	Blade Width	Blade Thickness	Handle Size	Recommended for Screw sizes
	HJJ.3EX-10	10"	1/16"	1/32"	5/16 Hex"	Nos. 6,8,10,12, and 1/4" Screws
	HJJ.3EX-8	8"
	HJJ.3EX-6	6"
	HJJ.3EX-3	3"
	HJJ.4EX-8	8"	3/64"	.022"	1/4" Hex	Nos. 3,4 and 5 screws
	HJJ.4EX-6	6"
	HJJ.4EX-3	3"
	HJJ.5EX-8	8"	1/32"	.018"	1/4" Hex	Nos. 0,1,and 2 screws
	HJJ.5EX-6	6"
	HJJ.5EX-3	3"

*Recommended for Reed & Prince FREARSON (Type II) and for Phillips POZIDRIVE® (type 1A). Not recommended for Type I cross-shaped recess screws ( the ordinary Phillips screws).

Back to Top of Page

 link to product table of contents       link to what's "NEW"        link to price list

FastCounter by LinkExchange

Please send comments, questions, email to   tom@newmantools.com

return to Newman Tools Home Page.

servicing the Canadian provinces of Newfoundland, Nova Scotia, New Brunswick, Prince Edward Island, Quebec, Ontario, Manitoba, Saskatchewan, Alberta ,British Columbia

and the states of Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin,Wyoming

updated January 2006