VACMAGIC
| VACMAGIC | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() Low profile base unit quickly mounts to machine table. Operates with 70 psi standard shop air. ![]() Vacuum pallet with rubber cord positioned for thin workpiece. ![]() Workpiece placed over rubber cord and pushed down to create a vacuum. Now ready for machining. |
ADVANTAGES OF VACMAGIC VM300
"Using a 2" (50mm) diameter face mill, we cut 6061 aluminum at 0.118" (3mm) deep, with a feed rate of 250"/min. (6.4 meters/min) with no sign of vibration or instability" Tech Report on file |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"We had a job that required profiling and cutting through half-inch highly engineered polymer plates. We cut our own seal design into a pallet and machined the run without a single reject. When finished, we simply resurfaced the pallet for the next job. With Vacmagic we make our own custom vacuum holders quickly, easily, and to super-tight specs. Invaluable!" Customer name withheld. Manufacturer of printing systems |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| "Our Vacmagic holds motorcycle cylinder heads, disc breaks, chucks, vices, and numerous other parts. The change-over from having an 8" chuck mounted on the machine to having a cylinder head is about 30 seconds - before Vacmagic, this would have taken an hour! Another real benefit is the ability to break into a long production run to fit in a rush job - knowing the only time lost is the 30 second change-over. Our stock of pallets with ready-mounted jigs is growing. daily."
R. Allen, Motalia Limited |
![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() Vise mounted on standard pallet for quick change from production to prototype. |
![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() The small tube is connected to a low pressure safety switch to disable machine if air pressure is too low. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
"We cut our setup time by 80%, reduced cycle times - including load/unload - by 50%. Fantastic! It paid for itself in one pay period." Martin Fuller, CNC Engineer, Respirex International |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Watch Vacmagic in action: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||








