Material Safety Data Sheet
January
2, 2007
Product Identification
NISSEN FELTIP PAINT MARKER – BLACK
J.P. Nissen Co.
Phone: 215-886-2025
2544 Fairhill Avenue
Fax: 215-886-0707
P.O. Box
339
Emergency: 1-800-424-9300
Glenside, PA
19038
HMIS Ratings-Health 1 Flammability
3 Reactivity 1
NFPA Ratings- Health 1 Flammability 3 Reactivity
0
Hazardous ingredients – The paint is contained
in a valve action reservoir and will not leak under normal conditions.
Ingredients
CAS#
%
Exposure Limits
Mineral Spirits
64742-88-7
30-35
100 ppm/8 hrs pel
VM& P Naptha
64742-89-8
15-20
300 ppm/8 hrs pel
Xylol (Xylene)
1330-20-7
1-5
100 ppm/8 hrs pel
Carbon Black 13463-67-7
15-20
5 mg/cu.m Respirable dust
High Boiling point
Aliphatic Hydrocarbon
64742-47-8
1-5
100 ppm/8hrs pel
Physical Data
Boiling point:246-404
F
Vapor density: Heavier than air.
Volatile %: 66.7% by volume
Specific gravity:
Less than 1.
Evaporation rate: Slower than Ethyl Ether Vapor
Pressure: 6.2 mm hg @ 20 deg. C
Appearance: Black viscous liquid with an aromatic
odor.
Volatile Organic Compounds data not required because product only
produced in quantities of less that 1 liter
Fire and Explosion Data
Flammability Class: IC
Flashpoint:
75 deg..F LEL:1% UEL 7%
Extinguishing Media: Foam, Carbon dioxide,
or any Class B extinguishing agent.
Water may be unsuitable as an extinguishing medium, but
helpful in keeping adjacent containers cool.
Health Hazard Data
Listed as possible carcinogen: NTP – No IARC
– OSHA – No
Symptoms of over exposure: Headache, Dizziness, Nausea,
Coughing, Eye, Throat and Skin Irritation.
Effects of overexposure: Slight to severe irritation
to eyes and mucous membranes.
Dermatitis.
Affects
central nervous system.
Emergency first aid: Inhalation; seek fresh
air. Give artificial respiration
if not breathing.
Skin contact; Wash with soap and water. Ingestion;
Call Physician. Do not induce vomiting. If vomiting occurs,
keep head below hips to prevent aspiration of liquid into lungs
Reactivity Data
Stability: Stable, hazardous polymerization:
Will not occur.
Conditions to avoid: Heat, open flames and
sparks.
Incompatibility: Do not expose to strong
oxidizers.
Hazardous decomposition products:
Carbon monoxide, carbon dioxide.
Environmental Protection
Procedures
Remove all sources of
ignition, ventilate area, and use absorbent material to clean
spills.
Disposal method: Dispose
of waste in accordance with all local, state and federal regulations.
Control Measures
Respiratory protection: None required under normal
use.
Ventilation: Normal-working conditions.
Protective Equipment: Safety glasses and gloves.
No special clothing required under normal
conditions
of use.
Transportation
Shipping Class ORM-D
UN Number 1263
Package Group III
Toxic Substances Control Act TSCA States:
All components of this product
are listed in the EPA’s Inventory of Chemical Substances
as required under the Toxic Substances Control Act (TSCA)
California Proposition 65
(Chemicals known to cause cancer)