Material Safety Data Sheet
January 2, 2007
Product Identification: NISSEN SOLID PAINT MARKER - YELLOW
NISSEN JUMBO SOLID
PAINT MARKER - YELLOW
J.P. Nissen Co.
Phone: 215-886-2025
2544 Fairhill Avenue
Fax: 215-886-0707
P.O. Box 339
Emergency: 1-800-424-9300
Glenside, PA
19038
HMIS Ratings-
Health 1 Flammability 2 Reactivity 1
NFPA Ratings- Health 1 Flammability 2 Reactivity
0
Hazardous ingredients – Characteristics
for Physical , Fire and Explosion data based on Ethylene Glycol
Monobutyl Ether Test data.
Ingredients
CAS#
%
Exposure Limits
Ethylene Glycol
Monobutyl Ether.
2 Butoxy Ethanol
111-76-2
10-54
240mg./m3 (skin)
Dibutyl Phthalate
84-74-2
2
5 mg./m3
Titanium Dioxide
13463-67-7
0-24
5 mg./cu.m
Pig Yellow CI 83
9004-36-8
36.5
N.I.A.
Cellulose Acetate Butylate 9004-36-8
36.5
N.I.A.
Ketone Resin
25086-25-3
36.5
N.I.A.
Physical Data
Boiling point: 336-343 F
Vapor density: 4.1
Volatile %: 10-54 % by volume
Specific gravity:
1.03-1.20
Evaporation rate: Slower than n-butyl acetate
Appearance: Solid paint
(semi-soft) with a slight aromatic odor.
Volatile Organic Compound data not required because product only
produced in quantities of less than 1 liter
Fire and Explosion Data
Flashpoint:
142 deg.F
LEL:1%
UEL:
7%
Extinguishing Media:
Foam, Carbon dioxide, or any Class B extinguishing agent. Water may be unsuitable
as an extinguishing medium, but helpful in keeping adjacent containers
cool.
Health Hazard Data
Symptoms of overexposure: Headache, Dizziness, Nausea,
Coughing, Eye, Throat and Skin Irritation.
Effects of overexposure: Slight to severe irritation
to eyes and mucous membranes.
Dermatitis.
Affects central nervous system.Persons with kidney impairment
or disease should not work with Dibutyl Phthalate,(overexposure
not likely unless ingested). High concentrations and /or prolonged
overexposure can be damaging to gastro-intestinalsystem, respiratory
system, central nervous system, kidneys, liver, and can cause
visual disturbences including corneal damage. (Based on liquid
forms of 2 Butoxy Ethanol and Dibutyl phthalate{ ingestion} .
Emergency first aid: Inhalation; seek fresh
air. Give artificial respiration
if not breathing.
Skin contact; Wash with soap and water. Ingestion; Call Physician.
Reactivity Data
Stability: Stable - Hazardous polymerization: Will not occur.
Conditions to avoid: Heat, open flames and
sparks.
Incompatibility: Do not expose to strong
oxidizers.
Hazardous decomposition products:
Carbon monoxide, carbon dioxide.
Environmental Protection
Procedures
Remove all sources of
ignition, ventilate area, and use absorbent material to clean
spills.
Disposal method: Dispose
of waste in accordance with all local, state and federal regulations.
Control Measures
Respiratory protection: None required under normal
use.
Ventilation: Normal-working conditions.
Protective Equipment: Safety glasses or goggles
and gloves. No special clothing required under normal
conditions of use.
Transportation
Not Regulated
Toxic Substances Control Act TSCA States:
All components of this product
are listed in the EPA’s Inventory of Chemical Substances
as required under the Toxic Substances Control Act (TSCA)
California Proposition 65
(Chemicals known to cause cancer)