Sign up for our Email Newsletter
 

PETOL Visetongs

PETOL visetongs.

PETOL VISETONGS are designed to operate best when large makeup torques are required and when heavy loads are needed to breakout tool joints, drill collars, reamers, and similar heavy jobs. A hydraulic cylinder can be attached to the end of the tong handle.

PETOL VISETONGS have the unique feature of being easily adjusted to various pipe sizes by simply sliding the heat-treated PETOL Special Chain through the jaw of the tong and engaging the locking cam lever. Regardless of the load on the handle, these tongs will not jam.

PETOL VISETONGS have minimum crushing effect, and great strength for their weight. Made of high-quality steel, these tongs are equipped with replaceable high-speed steel PETOL Diamond Point Inserts, which minimize marring of pipe surfaces. PETOL VISETONGS come in both pushup and pulldown designs.



CATALOG
NO.
O.D.*		 GRIPPING
WIDTH		 HANDLE
LENGTH
WEIGHT**		 MAXIMUM
WORKING LOAD
CHAIN CHART

PULLDOWN VISETONGS

PETOL.VTDA115H

 2" - 8" 5.25" 24" 79 lbs. 14,000 ft.-lbs. CHAIN CHART

PETOL.VTDA116H

 4" - 14" 7.25" 36" 176 lbs. 50,000 ft.-lbs. CHAIN CHART
PETOL.VTDA118 4" - 24" 9.00" 46" 317 lbs. 90,000 ft.-lbs. CHAIN CHART
PETOL.VTDA120 6" - 24" 12.63" 36" 575 lbs. 235,000 ft.-lbs. CHAIN CHART
PUSHUP VISETONGS
PETOL.VTUA118 4" - 24" 9.00" 54" 328 lbs. 75,000 ft.-lbs. CHAIN CHART
PETOL.VTUA118-L36 4" - 24" 9.00" 36" 294 lbs. 72,000 ft.-lbs. CHAIN CHART
PETOL.VTUA120 6" - 24" 12.63" 42" 559 lbs. 182,500 ft.-lbs. CHAIN CHART
 
*CHAIN ASSEMBLIES MUST BE ORDERED SEPARATELY. SEE CHAIN CHARTS.
**WEIGHTS DO NOT INCLUDE CHAIN.

STAND AT A RIGHT ANGLE TO DIRECTION OF PULL DURING OPERATION. READ SAFE PRACTICES & PROCEDURES MANUAL PRIOR TO OPERATION. DO NOT EXCEED PUBLISHED RATINGS. DO NOT OPERATE WITHOUT MANUAL. FOLLOW OSHA, NATIONAL SAFETY COUNCIL, HAND TOOLS INSTITUTE, ETC., STANDARDS, SAFE PRACTICES & PROCEDURES.

NOTE: SAFE PRACTICES & PROCEDURES MANUAL CAN BE FOUND HERE

Warning WARNING!
Do Not Exceed Maximum Working Load.
Overloading may result in injury or death.
Always use a load cell or other calibrated indicating device
to monitor the line pull on the tong to avoid overload.
Read Safe Practices & Procedures Manual prior to operation.
Follow OSHA, NSC, etc. standards, safe practices, and procedures.		 Warning

 
NOTE: PARTS MAY VARY SLIGHTLY AMONG SIZES. CALL FACTORY FOR DETAILS.
KEY NO. ITEM DESCRIPTION NO. REQ'D.
1 HANDLE 1
2 CHAIN SCREW NUT 1
3 CHAIN SCREW NUT LEVER 1
4 CHAIN SCREW 1
5 HANDLE PIN 1
6,7 CHAIN SCREW
PIN W/KLIPRINGS		 1
8 LATCH PIN 1
9 SPECIAL CHAIN ONLY 1
10 CHAIN PIN as req'd.
11 CHAIN PIN KLIPRING ONLY as req'd.
12,13 CHAIN HANDLE
PIN W/KLIPRINGS		 1
14 CHAIN HANDLE 1
15 INSERT 4
16 INSERT KEY 4
17 INSERT KEY SPRING 4
18 JAW 1
19,20 JAW PIN W/KLIPRINGS 1
21 PAWL 1
22,23 PAWL LATCH
RIVET W/KLIPRINGS		 1
24 LATCH SPRING 1
25 PAWL LATCH 1
 PETOL Visetongs exploded drawing.

 


CHAIN GUIDE

chains for
 VTDA115H Pulldown  VTDA116H Pulldown  VTDA118 Pulldown
     
 VTDA120 Pulldown  VTUA118 Pushup (All handles)  VTUA120 Pushup
     
     

 

VTDA115H Chain
CATALOG NO. O.D.
PETOL.151-45-25T 2" - 8"

VTDA116H Chain
CATALOG NO. O.D.
PETOL.161-45-25T 4" - 10"
PETOL.161-45-33T 4" - 14"
VTDA118 Chain
CATALOG NO. O.D.
PETOL.181-45-25T 4" - 12"
PETOL.181-45-33T 4" - 18"
PETOL.181-45-41T 4" - 24"
VTDA120 Chain
CATALOG NO. O.D.
PETOL.201-56-19T 6" - 14"
PETOL.201-56-25T 6" - 18"
PETOL.201-56-31T 6" - 24"
VTUA118 Chain
CATALOG NO. O.D.
PETOL.181-45-25T 4" - 12"
PETOL.181-45-33T 4" - 18"
PETOL.181-45-41T 4" - 24"
VTUA120 Chain
CATALOG NO. O.D.
PETOL.201-56-19T 6" - 14"
PETOL.201-56-25T 6" - 18"
PETOL.201-56-31T 6" - 24"

link to Petol Index Page

 

Sign up for our Email Newsletter
For Email Marketing you can trust