POSI LOCKtm PULLERS
100 ton hydraulic two and three jaw pullers
|
|
|
| POSI LOCKtm's hydraulically actuated Cage® design pullers are designed for use on large equipment and machines used at steel mills, oil fields, mining operations, utility projects, construction sites, ship yards, railroad yards, paper mills, airline shops, electric motor repair shops, etc. | |
![]() POS.PH-100T 100 Ton 3 Jaw Hydraulic Puller ![]() POS.PH-102T 100 Ton 2 Jaw Hydraulic Puller |
Portable 100 Ton Pullers Features and Benefits: *Double acting 100 ton cylinder is available upon request*. |
![]() Removal of large gear off press |
![]() Large pulley removal from shaft |
| POSI LOCKtm100 ton hydraulic pullers provide maximum pulling force in applications requiring high force removal of large gears, pulleys, wheels, sleeves and other press fit parts. A hydraulic power lift cart enables the puller to be raised up to 5ft. above ground. Lifting brackets allow the puller to be removed from the cart and lifted into work places above 5ft. When not in use, the lift cart may be used as a means to manually transport the puller. | |
![]() |
![]() |
|
POS.PH-123T 100 Ton 2/3 Jaw Combination Hydraulic Puller |
|
![]() POS.PH-123T 3 Jaw Configuration |
![]() POS.PH-123T 2 Jaw Configuration |
|
|
|
![]() 1. Move the Cage® cylinder from 2 jaw position to 3 jaw position. |
![]() 2. Place the 3rd jaw into the lower 3 jaw position. |
![]() 3. Remove the jaw from the 2 jaw position. |
![]() 4. Place jaw from 2 jaw position into upper 3 jaw position. |
link to index page












