link to Home Page
  Newman Tools Inc.     Tel 1-800-465-1384       Fax 1-800-605-2442
...IN STOCK...
vast selection, over 30,000 different items including "hard-to-find/special sizes"

NEW PRODUCTS FROM PRECISION BRAND:

      Metric (Steel) Feeler Gage Poc-Kit®    .040" & .050" Steel Feeler Gage    Arbor Shim Assortment Kits         "THE BIG" Tru Punch™ Punch & Die Set

Back to Top of Page

Metric (Steel) Feeler Gage Poc-Kit®

• Precision Brand brings you "true" metric feeler gage in a convenient assortment
• Made of C1095 close grain high carbon spring steel
• Rockwell Hardness: C Scale 45-62
• Assortment contains twenty 12.7mm (1/2") wide x 127mm (5") long blades
• Each blade is clearly etched with thickness
• Packaged in a sturdy vinyl case with individual blade pockets
• Assortment conveniently folds flat
• Ends are rounded and edges are smooth for safety
• Individual blade thicknesses and coil stock also available on special order

Metric Steel Feeler Gage Poc-Kit Assortment
UPC No. 09740 - 20 Thicknesses - Metric/mm
.05mm	.30mm	.55mm	.80mm
.10mm	.35mm	.60mm	.85mm
.15mm	.40mm	.65mm	.90mm
.20mm	.45mm	.70mm	.95mm
.25mm	.50mm	.75mm	1.00mm

Back to Top of Page

.040" & .050" Steel Feeler Gage

• Precision Brand brings you tight tolerance heavier steel feeler gage.
• Made of C1095 close grain high carbon spring steel
• Blades are 1/2" wide x 12" long
• Hardened and tempered to RC 48-62
• Material is ground and polished to precision tolerances
• Thicknesses are clearly etched every 6 inches
• Other lengths and coil stock also available on special order

Steel Feeler Gage
Decimal Thickness	Pcs. Per Pkg.	12" Lengths UPC No. / PBP No.	Tolerance
.040	12	19790/19K40	±.00094
.050	6	19805/19K50	±.0005

Back to Top of Page

Arbor Shim Assortment Kits

• Precision Brand Arbor Shim Assortment Kits include the most popular sizes.
• A convenient assortment kit is great to take on-site
• Made from full hard, cold rolled, low carbon 1010 steel shim stock
• Rockwell hardness: RB90-100
• Packaged in a durable plastic box with individual shim compartments

Arbor Shim Assortment Kits
Assortment Thicknesses	Assortment Sizes	Assortment UPC No.
.005 .010 .015	3/8" x 5/8" 1/2" x 3/4" 5/8" x 1" 3/4" x 1-1/8" 7/8" x 1-3/8"	25998
.020 .031 .125	3/8" x 5/8" 1/2" x 3/4" 5/8" x 1" 3/4" x 1-1/8" 1" x 1-1/2"	25999

Back to Top of Page

"THE BIG" Tru Punch™ Punch & Die Set

The First Self-Centering Punch & Die to Make Shims Up to 1-1/4"

• Precision Brand's "THE BIG'' Tru Punch™ makes perfect custom washers, shims and gaskets in seconds and can accommodate up to 1-1/4" o.d.
• Eliminates time and material wasted with conventional punches
• No guess work needed to center the I.D.
• No need to scribe center lines
• Exclusive, patented punch, pilot and pin system
• Packaged in a durable plastic case
• Four punch sizes: 7/8", 1", 1-1/8" and 1-1/4"
• Four I.D. pilot sizes: 3/4", 7/8", 1" and 1-1/8"
• Works in conjunction with Precision Brand's Tru Punch® #40110 I.D. pilots are interchangeable to allow for 77 O.D. and I.D. shim combinations
• Cuts steel up to .015" thick
• Cuts brass, copper, aluminum, rubber and plastic effortlessly up to .020" thick
• Cuts stainless and blue tempered shim up to .010" thick
• The base, top and punches are made of a hardened and ground A-2 tool steel

U.S. Patent # 4,949,614

"THE BIG" Tru Punch
Description	UPC No.
Complete Big Tru Punch Punch & Die Set	40200
Replacement Punches, Pins & Pilots (complete set only)	40215
Reconditioned Die Set (only available with repairable trade-in)	40230

Back to Top of Page



 link to product table of contents       link to what's "NEW"        link to price list

Please send comments, questions, email to   tom@newmantools.com    ( this email will be returned advising you to resend the email to the following email address )

spamfilter1 "at" newmantools "dot" com. This notation is to prevent the robots from harvesting this email address.

return to Newman Tools Home Page.

Copyright (c) Newman Tools Inc.
December 1998 -->