Precision Brand Punch and Dies Sets
makes customs shims in seconds

Traditonal | TruPunch® | "The Big" TruPunch™ | "Metric 10" TruPunch®
Traditional Punch & Die Set
- Traditional style punch & die set
- Economical way to make washers, shims and gaskets
- Cut steel, brass, copper, aluminum, rubber and plastic up to .025" thick
- Cut stainless and blue tempered shim up to .010" thick
- Packaged in durable plastic case
- The base and punches are made of a hardened and ground A-2 tool steel
- Clear plastic top plate is marked with accurate center lines
- Mark center lines, align with center lines and hit with hammer
- Nine punch sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4"
| UPC No. | Description | Weight (lbs) |
|---|---|---|
| PB-40105 | Complete Punch & Die Set | 2.2 |
| PB-40999 | Die Stand | 0.8 |
| PB-40100 | Replacement Punches (complete set only) |
0.7613 |
TruPunch® Punch & Die Set
The First Self-Centering Punch & Die
- PRECISION BRAND TruPunch® makes perfect, custom washers, shims and gaskets in seconds
- Eliminates time and material wasted with conventional punch & dies
- No guess work needed to center the I.D.
- No need to scribe center lines
- Exclusive, patented punch, pilot and pin system
- Packaged in a durable plastic case
- Nine punch sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4"
- Eight I.D. sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8"
- Cuts steel, brass, copper, aluminum, rubber and plastic effortlessly up to .025" thick
- Cuts stainless and blue tempered shim up to .010" thick
- The base and punches are made of a hardened and ground A-2 tool steel
| UPC No. | Description | Weight (lbs) |
|---|---|---|
| PB-40110 | Complete TruPunch® Punch & Die Set | 2.45 |
| PB-40115 | Replacement Punches & Pilots (complete set only) |
0.806 |
| PB-40999 | Die Stand | 0.8 |
How to use the PRECISION BRAND® TruPunch®:
- Punch the I.D. hole first
- Attach the appropriate I.D. pilot to the O.D. punch
- Move the material so the I.D. hole is beneath the O.D. guide hole on the plastic top
- Insert the O.D. punch so that the I.D. pilot moves into the I.D.hole which should automatically center the material. Make sure the O.D. punch has been pushed completely through the plastic top and is touching the material
- Strike the punch squarely with enough force to penetrate the material with one blow
"The Big" TruPunch™ Punch & Die Set
The First Self-Centering Punch & Die to make shims up to 1-1/4"
- "THE BIG" TruPunch™ by PRECISION BRAND makes perfect, custom washers, shims and gaskets in seconds and can accommodate up to 1-1/4" O.D.
- Eliminates time and material wasted with conventional punches
- No guess work needed to center the I.D.
- No need to scribe center lines
- Exclusive, patented punch, pilot and pin system
- Packaged in a durable plastic case
- Four punch sizes: 7/8", 1", 1-1/8" and 1-1/4"
- Four I.D. pilot sizes: 3/4", 7/8", 1" and 1-1/8"
- Works in conjunction with Precision Brand's TruPunch #PB-40110, ID Pilots are interchangeable to allow for 77 O.D. and I.D. shim combinations
- Cut brass, copper, aluminum, rubber and plastic effortlessly up to .020" thick
- Cut steel up to .015" thick
- Cut stainless and blue tempered shim up to .010" thick
- The base, top and punches are made of a hardened and ground A-2 tool steel
| UPC No. | Description | Weight (lbs) |
|---|---|---|
| PB-40200 | "The Big" TruPunch™ Punch & Die Set | 3.95 |
| PB-40215 | Replacement Punches & Pilots (complete set only) |
1 |
| PB-40999 | Die Stand | 0.8 |
How to use the “THE BIG” TruPunch™ by Precision Brand®:
- Punch the I.D. hole first
- Attach the appropriate I.D. pilot to the O.D. punch
- Place the material in between the top and base plates so the I.D. hole is beneath the O.D. guide hole
- Insert the O.D. punch so that the I.D. pilot moves into the I.D. hole which should automatically center the material. Make sure the O.D. punch has been pushed completely through the top plate and is touching the material
- Strike the punch squarely with enough force to penetrate the material with one blow
"Metric 10" TruPunch® Punch & Die Set
The First "True Metric" Self-Centering Punch & Die with ten sizes!
- PRECISION BRAND "Metric 10" TruPunch® makes perfect, "true metric size" custom washers, shims and gaskets in seconds
- It's the only metric punch & die which will give you ten true metric size punches
- Eliminates time and material wasted with conventional punch & dies
- No guess work needed to center the I.D.
- No need to scribe center lines
- Exclusive, patented punch, pilot and pin system
- Packaged in a durable plastic case
- Ten punch sizes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm & 20mm
- Nine I.D. sizes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 16mm
- Cuts steel, brass, copper, aluminum, rubber and plastic effortlessly up to .025"/.635mm thick
- Cuts stainless and blue tempered shim up to .010"/.25mm thick
- This set can produce 44 different ID and OD shim combinations
- The base and punches are made of a hardened and ground A-2 tool steel
| UPC No. | Description | Weight (lbs) |
|---|---|---|
| PB-40300 | "Metric 10" TruPunch® Punch & Die Set | 2.5 |
| PB-40315 | "Metric 10" TruPunch® Punch & Die Set Replacement Punches & Pilots |
1 |
| PB-40999 | Die Stand | 0.8 |
- Punch the I.D. hole first
- Attach the appropriate I.D. pilot to the O.D. punch
- Move the material so the I.D. hole is beneath the O.D. guide hole on the plastic top
- Insert the O.D. punch so that the I.D. pilot moves into the I.D.hole which should automatically center the material. Make sure the O.D. punch has been pushed completely through the plastic top and is touching the material
- Strike the punch squarely with enough force to penetrate the material with one blow
