Order on Line  add to cart

Precision Brand Slotted Shim

slotted shim kits

Precision alignment begins with precision shims

 

Slotted Shims

Slotted shims are thin, flat pieces with a cutout, used in industrial settings for precise adjustments.

Made from stainless steel, they allow for easy insertion and removal without disassembly.

Their primary application is aligning and leveling components such as motors and gearboxes.

Slotted shims are a cost-effective solution for fine-tuning alignments.

Specifications | FAQ

 

 

Stainless Steel Slotted Shim
Decimal Sizes

 

 

Decimal Inch Size Stainless Slotted Shim Assortments

 

Decimal Inch Size Stainless Slotted Shim Assortments

             
Part Number UPC No. Type Pcs. Per Asst. Size Slot Size Weight
SHIM2X2MINI 42940 Mini Assortment 130 2" x 2"
Size A
5/8" 6.8
SHIM2X2SK 42945 Shop Kit 80 2" x 2"
Size A
5/8" 3.6687
SHIM2X2FA 42900 Full Assortment 260 2" x 2"
Size A
5/8" 10.9
SHIM2X2AIO 42996 All-In-One Kit 300 2",3",4", & 5" Asst. 44.8
SHIM3X3FA 42910 Full Assortment 260 3" x 3"
Size B
7/8" 24.4
SHIM3X3MINI 42950 Mini Assortment 130 3" x 3"
Size B
7/8" 14.6
SHIM3X3SK 42955 Shop Kit 80 3" x 3"
Size B
7/8" 4.375
SHIM4X4MINI 42960 Mini Assortment 130 4" x 4"
Size C
1-1/4" 24.2
SHIM4X4SK 42965 Shop Kit 80 4" x 4"
Size C
1-1/4" 6.578
SHIM4X4FA 42920 Full Assortment 260 4" x 4"
Size C
1-1/4" 41.1
SHIM5X5FA 42930 Full Assortment 260 5" x 5"
Size D
1-5/8" 61.7
SHIM5X5MINI 42970 Mini Assortment 130 5" x 5"
Size D
1-5/8" 35.5
SHIM5X5SK 42975 Shop Kit 80 5" x 5"
Size D
1-5/8" 9.878
SHIM6X6ASS 42925 Asst. 52 6"x6"
Size E
2" 23.5
SHIM8X8ASS 42935 Asst. 52 8" x 8"
Size H
2-3/8" 40

 

 

 

 

2" x 2"-Size A Stainless Slotted Shim

  • 300 Series Stainless Steel resists rust and corrosion
  • Available in refills and assortments listed below
  • Full Assortment contains 20 pieces each of 13 thicknesses
  • Mini Assortment contains 10 pieces each of 13 thicknesses
  • Shop Kit assortment contains 10 pieces of 8 thicknesses
  • .031", .060", .25", .375", and .50" thicknesses available on special order
Part Number UPC No. Decimal Thickness Pcs. Per Pkg. Size Slot Size Weight
SHIM2X2-.001 42205 .001 20 2" x 2"
Size A
5/8" 0.03
SHIM2X2-.002 42210 .002 20 2" x 2"
Size A
5/8" 0.0519
SHIM2X2-.003 42215 .003 20 2" x 2"
Size A
5/8" 0.072
SHIM2X2-.004 42220 .004 20 2" x 2"
Size A
5/8" 0.0924
SHIM2X2-.005 42225 .005 20 2" x 2"
Size A
5/8" 0.1126
SHIM2X2-.010 42230 .010 20 2" x 2"
Size A
5/8" 0.2096
SHIM2X2-.015 42235 .015 10 2 x 2"
Size A
5/8" 0.1643
SHIM2X2-.020 42240 .020 10 2" x 2"
Size A
5/8" 0.2163
SHIM2X2-.025 42245 .025 10 2" x 2"
Size A
5/8" 0.2674
SHIM2X2-.050 42250 .050 5 2" x 2"
Size A
5/8" 0.2656
SHIM2X2-.075 42255 .075 5 2" x 2"
Size A
5/8" 0.3941
SHIM2X2-.100 42260 .100 5 2" x 2"
Size A
5/8" 0.5129
SHIM2X2-.125 42265 .125 5 2" x 2"
Size A
5/8" 0.6307
SHIM2X2FA 42900 Full Assortment 260 2" x 2"
Size A
5/8" 10.9
SHIM2X2BOX 42901 Metal Box Only 2" x 2"
Size A
2.3
SHIM2X2MINI 42940 Mini Assortment 130 2" x 2"
Size A
5/8" 6.8
SHIM2X2SK 42945 Shop Kit 80 2" x 2"
Size A
5/8" 3.6687

Click Here for Specs

 

 

 

3" x 3"-Size B Stainless Slotted Shim

  • 300 Series Stainless Steel resists rust and corrosion
  • Available in refills and assortments listed below
  • Full Assortment contains 20 pieces each of 13 thicknesses
  • Mini Assortment contains 10 pieces each of 13 thicknesses
  • Shop Kit assortment contains 10 pieces of 8 thicknesses
  • .031", .060", .25", .375", and .50" thicknesses available on special order
Part Number UPC No. Decimal Thickness Pcs. Per Pkg. Size Slot Size Weight
SHIM3X3-.001 42305 .001 20 3" x 3"
Size B
7/8" 0.0656
SHIM3X3-.002 42310 .002 20 3" x 3"
Size B
7/8" 0.1158
SHIM3X3-.003 42315 .003 20 3" x 3"
Size B
7/8" 0.1542
SHIM3X3-.004 42320 .004 20 3" x 3"
Size B
7/8" 0.2055
SHIM3X3-.005 42325 .005 20 3" x 3"
Size B
7/8" 0.2527
SHIM3X3-.010 42330 .010 20 3" x 3"
Size B
7/8" 0.4827
SHIM3X3-.015 42335 .015 10 3" x 3"
Size B
7/8" 0.3799
SHIM3X3-.020 42340 .020 10 3" x 3"
Size B
7/8" 0.4943
SHIM3X3-.025 42345 .025 10 3" x 3"
Size B
7/8" 0.6141
SHIM3X3-.050 42350 .050 5 3" x 3"
Size B
7/8" 0.6143
SHIM3X3-.075 42355 .075 5 3" x 3"
Size B
7/8" 0.8959
SHIM3X3-.100 42360 .100 5 3" x 3"
Size B
7/8" 1.218
SHIM3X3-.125 42365 .125 5 3" x 3"
Size B
7/8" 1.4465
SHIM3X3FA 42910 Full Assortment 260 3" x 3"
Size B
7/8" 24.4
SHIM3X3BOX 42911 Metal Box Only 3" x 3"
Size B
4.2
SHIM3X3MINI 42950 Mini Assortment 130 3" x 3"
Size B
7/8" 14.6
SHIM3X3SK 42955 Shop Kit 80 3" x 3"
Size B
7/8" 4.375

Click Here for Specs

 

 

 

4" x 4"-Size C Stainless Slotted Shim

  • 300 Series Stainless Steel resists rust and corrosion
  • Available in refills and assortments listed below
  • Full Assortment contains 20 pieces each of 13 thicknesses
  • Mini Assortment contains 10 pieces each of 13 thicknesses
  • Shop Kit assortment contains 10 pieces of 8 thicknesses
  • .031", .060", .25", .375", and .50" thicknesses available on special order
Part Number UPC No. Decimal Thickness Pcs. Per Pkg. Size Slot Size Weight
SHIM4X4-.001 42405 .001 20 4" x 4"
Size C
1-1/4" 0.1115
SHIM4X4-.002 42410 .002 20 4" x 4"
Size C
1-1/4" 0.1937
SHIM4X4-.003 42415 .003 20 4" x 4"
Size C
1-1/4" 0.2729
SHIM4X4-.004 42420 .004 20 4" x 4"
Size C
1-1/4" 0.3471
SHIM4X4-.005 42425 .005 20 4" x 4"
Size C
1-1/4" 0.4268
SHIM4X4-.010 42430 .010 20 4" x 4"
Size C
1-1/4" 0.8141
SHIM4X4-.015 42435 .015 10 4" x 4"
Size C
1-1/4" 0.6462
SHIM4X4-.020 42440 .020 10 4" x 4"
Size C
1-1/4" 0.8502
SHIM4X4-.025 42445 .025 10 4" x 4"
Size C
1-1/4" 1.0457
SHIM4X4-.050 42450 .050 5 4" x 4"
Size C
1-1/4" 1.0303
SHIM4X4-.075 42455 .075 5 4" x 4"
Size C
1-1/4" 1.5306
SHIM4X4-.100 42460 .100 5 4" x 4"
Size C
1-1/4" 2.0673
SHIM4X4-.125 42465 .125 5 4" x 4"
Size C
1-1/4" 2.4828
SHIM4X4FA 42920 Full Assortment 260 4" x 4"
Size C
1-1/4" 41.1
SHIM4X4BOX 42921 Metal Box Only 4" x 4"
Size C
6.3
SHIM4X4MINI 42960 Mini Assortment 130 4" x 4"
Size C
1-1/4" 24.2
SHIM4X4SK 42965 Shop Kit 80 4" x 4"
Size C
1-1/4" 6.578

Click Here for Specs

 

 

 

5" x 5"-Size D Stainless Slotted Shim

  • 300 Series Stainless Steel resists rust and corrosion
  • Available in refills and assortments listed below
  • Full Assortment contains 20 pieces each of 13 thicknesses
  • Mini Assortment contains 10 pieces each of 13 thicknesses
  • Shop Kit assortment contains 10 pieces of 8 thicknesses
  • .031", .060", .25", .375", and .50" thicknesses available on special order

Part Number UPC No. Decimal Thickness Pcs. Per Pkg. Size Slot Size Weight
SHIM5X5-.001 42505 .001 20 5" x 5"
Size D
1-5/8" 0.1694
SHIM5X5-.002 42510 .002 20 5" x 5"
Size D
1-5/8" 0.2968
SHIM5X5-.003 42515 .003 20 5" x 5"
Size D
1-5/8" 0.4261
SHIM5X5-.004 42520 .004 20 5" x 5"
Size D
1-5/8" 0.5373
SHIM5X5-.005 42525 .005 20 5" x 5"
Size D
1-5/8" 0.6462
SHIM5X5-.010 42530 .010 20 5" x 5"
Size D
1-5/8" 1.283
SHIM5X5-.015 42535 .015 10 5" x 5"
Size D
1-5/8" 0.9931
SHIM5X5-.020 42540 .020 10 5" x 5"
Size D
1-5/8" 1.2984
SHIM5X5-.025 42545 .025 10 5" x 5"
Size D
1-5/8" 1.6085
SHIM5X5-.050 42550 .050 5 5" x 5"
Size D
1-5/8" 1.6547
SHIM5X5-.075 42555 .075 5 5" x 5"
Size D
1-5/8" 2.3584
SHIM5X5-.100 42560 .100 5 5" x 5"
Size D
1-5/8" 3.1388
SHIM5X5-.125 42565 .125 5 5" x 5"
Size D
1-5/8" 3.8209
SHIM5X5FA 42930 Full Assortment 260 5" x 5"
Size D
1-5/8" 61.7
SHIM5X5BOX 42931 Metal Box Only 5" x 5"
Size D
7.8
SHIM5X5MINI 42970 Mini Assortment 130 5" x 5"
Size D
1-5/8" 35.5
SHIM5X5SK 42975 Shop Kit 80 5" x 5"
Size D
1-5/8" 9.878

Click Here for Specs

 

 

 

6" x 6"-Size E Stainless Slotted Shim

  • 300 Series Stainless Steel
  • Available in thicknesses from .001" to .500"
  • .031" and .060" thicknesses available as a special order
  • Available in refills and an assortment listed below
  • Assortment contains 4 pieces each of 13 thicknesses
  • .001" to .125" shim tabs contain hole for easy removal
  • Each shim is marked in ink with thickness in decimal and metric
  • Shim thickness tolerances are nominal
  • Part Number UPC No. Decimal Thickness Pcs. Per Pkg. Size Slot Size Weight
    SHIM6x6-.001 42605 .001 5 6" x 6"
    Size E
    2" 0.05
    SHIM6x6-.002 42610 .002 5 6" x 6"
    Size E
    2" 0.1
    SHIM6x6-.003 42615 .003 5 6" x 6"
    Size E
    2" 0.15
    SHIM6x6-.004 42620 .004 5 6" x 6"
    Size E
    2" 0.2
    SHIM6x6-.005 42625 .005 5 6" x 6"
    Size E
    2" 0.25
    SHIM6x6-.010 42630 .010 5 6" x 6"
    Size E
    2" 0.55
    SHIM6x6-.015 42635 .015 5 6" x 6"
    Size E
    2" 0.8
    SHIM6x6-.020 42640 .020 5 6" x 6"
    Size E
    2" 1.05
    SHIM6x6-.025 42645 .025 5 6" x 6"
    Size E
    2" 1.3
    SHIM6x6-.050 42650 .050 5 6" x 6"
    Size E
    2" 2.65
    SHIM6x6-.075 42655 .075 5 6" x 6"
    Size E
    2" 3.95
    SHIM6x6-.100 42660 .100 5 6" x 6"
    Size E
    2" 5.7
    SHIM6x6-.125 42665 .125 5 6" x 6"
    Size E
    2" 6.35
    SHIM6x6-.250 42670 .250 1 6" x 6"
    Size E
    2" 2.55
    SHIM6x6-.500 42675 .500 1 6" x 6"
    Size E
    2" 5.1
    SHIM6x6ASS 42925 Asst. 52 6"x6"
    Size E
    2" 23.5
    SHIM6x6BOX 42961 Metal Box Only 1 6" x 6"
    Size E
    - 4.95

    Click Here for Specs

     

     

     

    8" x 8"-Size H Stainless Slotted Shim

  • 300 Series Stainless Steel
  • Available in thicknesses from .001" to .500"
  • .031" and .060" thicknesses available as a special order
  • Available in refills and an assortment listed below
  • Assortment contains 4 pieces each of 13 thicknesses
  • .001" to .125" shim tabs contain hole for easy removal
  • Each shim is marked in ink with thickness in decimal and metric
  • Shim thickness tolerances are nominal
  • Part Number UPC No. Decimal Thickness Pcs. Per Pkg. Size Slot Size Weight
    SHIM8X8-.001 42805 .001 5 8" x 8"
    Size E
    2-3/8" 0.1
    SHIM8X8-.002 42810 .002 5 8" x 8"
    Size E
    2-3/8" 0.2
    SHIM8X8-.003 42815 .003 5 8" x 8"
    Size E
    2-3/8" 0.25
    SHIM8X8-.004 42820 .004 5 8" x 8"
    Size E
    2-3/8" 0.35
    SHIM8X8-.005 42825 .005 5 8" x 8"
    Size E
    2-3/8" 0.45
    SHIM8X8-.010 42830 .010 5 8" x 8"
    Size E
    2-3/8" 0.9
    SHIM8X8-.015 42835 .015 5 8" x 8"
    Size E
    2-3/8" 1.35
    SHIM8X8-.020 42840 .020 5 8" x 8"
    Size E
    2-3/8" 1.8
    SHIM8X8-.025 42845 .025 5 8" x 8"
    Size E
    2-3/8" 2.25
    SHIM8X8-.050 42850 .050 5 8" x 8"
    Size E
    2-3/8" 4.5
    SHIM8X8-.075 42855 .075 5 8" x 8"
    Size E
    2-3/8" 6.75
    SHIM8X8-.100 42860 .100 5 8" x 8"
    Size E
    2-3/8" 9.8
    SHIM8X8-.125 42865 .125 5 8" x 8"
    Size E
    2-3/8" 10.9
    SHIM8X8-.250 42870 .250 1 8" x 8"
    Size E
    2-3/8" 4.37
    SHIM8X8-.500 42875 .500 1 8" x 8"
    Size E
    2-3/8" 8.74
    SHIM8X8ASS 42935 Asst. 52 8" x 8"
    Size H
    2-3/8" 40
    SHIM8X8BOX 42981 Metal Box Only 1 8" x 8"
    Size E
    - 8.1

    Click Here for Specs

     

     

     

    Specs

    STAINLESS DECIMAL
    SLOTTED SHIM TOLERANCES

    Thickness
    Tolerance
    .001
    +/-.00008
    .002
    +/-.0001
    .003
    +/-.00015
    .004
    +/-.0002
    .005
    +/-.00025
    .010 to .020
    +/-.0005
    .025
    +/-.00075
    .050
    +/-.0015
    .075 & .100
    +/-.002
    .125
    +/-.0025

     

     

     

    FAQ Stainless Steel Slotted Shim Questions

    Below you will find some commonly asked questions. We hope you will find this helpful. Once you have reviewed these questions and still want to ask another question, please contact us.

     



    What are slotted motor shims used for?

     

    Primarily they are used under motor feet to adjust the height of a motor. This allows for the accurate alignment of the shafts between pumps and motors. They can also be used to help level equipment during installation.


     


    Why are thickness tolerances so important?

     

    Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap's thickness. With our guaranteed thickness they will be "right-on" when you do that final check. This will save time of having to do another measurement rotation.


     

    Aren’t all precut slotted shims marked with an "actual" thickness?

     

    No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.


     

    What about shims that claim to be marked with an "exact" thickness like .098 instead of .100?

     

    There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, "off-size" decimal thickness. Remember that these shims were originally intended to be "on-size" and ended up "off-size". Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of "on-size", closer tolerance shims. To illustrate this, let's do two math problems:
    Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)

    Working with "on-size" shims eliminates the time spent searching for that "perfect combination".

     


    How do I know that I am getting the best?

     

    Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!

     

    link to Precision Brand index page

    November 2023, March 2018, April 2011, December 1998

    The descriptions, illustrations, specifications, dimensions, and part numbers are subject to change without notice.

    servicing the Canadian provinces and territories of Newfoundland, NF, NL, Nova Scotia, NS, New Brunswick, NB, Prince Edward Island, PEI, PE, Quebec, PQ, QC, Ontario, ON, Manitoba, MB, Saskatchewan, SK, Alberta, AB, British Columbia, BC, Northwest Territories, NT, Nunavut, NU, Yukon, YT, servicing Canadian cities, Toronto, Mississauga, Scarborough, Laval , Montreal, Montréal, Vancouver, Ottawa, Gatineau, Calgary, Edmonton, Québec City, Winnipeg, Hamilton, Kitchener, Cambridge, Waterloo, London, St. Catharines , Niagara, Halifax, Oshawa, Victoria, Windsor, Saskatoon, Regina, Sherbrooke, St. John's, Barrie, Kelowna, Abbotsford, Mission, Sudbury Kingston, Saguenay, Trois-Rivieres, Trois Rivieres, Trois-Rivières, Guelph, Moncton, Brantford, Saint John, Thunder Bay, Peterborough, Ajax, Aurora, Brampton, Brock, Burlington, Caledon, Clarington, Durham Region, Oshawa, Pickering, Whitby, Halton Hills, Milton, Oakville, Mississauga, New market, Richmond Hill, Vaughn, Orangeville, servicing US cities, New York, Los Angeles, Chicago, Houston, Philadelphia, Phoenix, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, San Francisco, Indianapolis, Columbus, Fort Worth, Charlotte, Seattle, Denver, El Paso, Detroit, Washington, Boston, Memphis, Nashville, Portland, Oklahoma City, Las Vegas, Baltimore, Louisville, Milwaukee, Albuquerque, Tucson, Fresno, Sacramento, Kansas City, Long Beach, Mesa, Raleigh, Omaha, Miami, Oakland, Minneapolis, Tulsa, Wichita, New Orleans, Arlington, Cleveland, Bakersfield, Tampa, Aurora, Honolulu, Anaheim, Santa Ana, Corpus Christi, Riverside, St. Louis, Lexington, Stockton, Pittsburgh, Saint Paul, Anchorage, Cincinnati, Henderson, Greensboro, Plano, Newark, Toledo, Lincoln, Orlando, Chula Vista, Jersey City, Chandler, Fort Wayne, Buffalo, Durham, St. Petersburg, Irvine, Laredo, Lubbock, Madison, Gilbert, Norfolk, Reno, Winston Salem, Glendale, Hialeah, Garland, Scottsdale, Chesapeake, North Las Vegas, Fremont, Baton Rouge, Richmond, Boise, San Bernardino, Spokane, Birmingham, Modesto, Des Moines, Rochester, Tacoma, Fontana, Oxnard, Moreno Valley, Fayetteville, Huntington Beach, Yonkers, Glendale, Aurora, Montgomery, Columbus, Amarillo, Little Rock, Akron, Shreveport, Augusta, Grand Rapids, Mobile, Salt Lake City, Huntsville, Tallahassee, Grand Prairie, Overland Park, Knoxville, Worcester, Brownsville, Newport News, Santa Clarita, Port St. Lucie, Providence, Fort Lauderdale, Chattanooga, Tempe, Oceanside, Garden Grove, Rancho Cucamonga, Cape Coral, Santa Rosa, Vancouver, Sioux Falls, Peoria, Ontario, Jackson, Elk Grove, Springfield, Pembroke Pines, Salem, Corona, Eugene, McKinney, Fort Collins, Lancaster, Cary, Palmdale, Hayward, Salinas, Frisco, Springfield, Pasadena, Macon, Alexandria, Pomona, Lakewood, Sunnyvale, Escondido, Kansas City, Hollywood, Clarksville, Torrance, Rockford, Joliet, Paterson, Bridgeport, Naperville, Savannah, Mesquite, Syracuse, Pasadena, Orange, Fullerton, Killeen, Dayton, McAllen, Bellevue, Miramar, Hampton, West Valley City, Warren, Olathe, Columbia, Thornton, Carrollton, Midland, Charleston, Waco and the states of Alabama, AL, Alaska, AK, Arizona, AZ, Arkansas, AR, California, CA, Colorado, CO, Connecticut, CT, Delaware, DE, District of Columbia, DC, Florida, FL, Georgia, GA, Hawaii, HI, Idaho, ID, Illinois, IL, Indiana, IN, Iowa, IA, Kansas, KS, Kentucky, KY, Louisiana, LA, Maine, ME, Maryland, MD, Massachusetts, MA, Michigan, MI, Minnesota, MN, Mississippi, MS, Missouri, MO, Montana, MT, Nebraska, NE, Nevada, NV, New Hampshire, NH, New Jersey, NJ, New Mexico, NM, New York, NY, North Carolina, NC, North Dakota, ND, Ohio, OH, Oklahoma, OK, Oregon, OR, Pennsylvania, PA, Rhode Island, RI, South Carolina, SC, South Dakota, SD, Tennessee, TN, Texas, TX, Utah, UT, Vermont, VT, Virginia, VA, Washington, WA, West Virginia, WV, Wisconsin, WI, Wyoming, WY We can ship to Afghanistan , Aland Islands , Albania , Algeria , American Samoa , AS, Andorra , Angola , Anguilla , Antigua and Barbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Azores , Bahamas , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bermuda , Bhutan , Bolivia , Bonaire , Bosnia , Botswana , Brazil , British Virgin Isles , Brunei , Bulgaria , Burkina Faso , Burundi , Cambodia , Cameroon , Canada , Canary Islands , Cape Verde , Cayman Islands , Central African Republic , Chad , Chile , China , Colombia , Comoros , Congo , Cook Islands , Costa Rica , Croatia , Curacao , Cyprus , Czech Republic , Democratic Republic of Congo , Denmark , Djibouti , Dominica , Dominican Republic , Ecuador , Egypt , El Salvador , England , Equatorial Guinea , Eritrea , Estonia , Ethiopia , Faeroe Islands , Fiji , Finland , France , French Guiana , French Polynesia , Gabon , Gambia , Georgia , Germany , Ghana , Gibraltar , Greece , Greenland , Grenada , Guadeloupe , Guam , GU, Guatemala , Guernsey , Guinea , Guinea-Bissau , Guyana , Haiti , Holland , Honduras , Hong Kong , Hungary , Iceland , India , Indonesia , Iraq , Ireland , Israel , Italy , Ivory Coast , Jamaica , Japan , Jersey , Jordan , Kazakhstan , Kenya , Kiribati , Kosrae , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Liechtenstein , Lithuania , Luxembourg , Macau , Macedonia (Fyrom) , Madagascar , Madeira , Malawi , Malaysia , Maldives , Mali , Malta , Marshall Islands , MH, Martinique , Mauritania , Mauritius , Mayotte , Mexico , Micronesia , Moldova , Monaco , Mongolia , Montenegro , Montserrat , Morocco , Mozambique , N. Mariana Islands , Namibia , Nepal , Netherlands , Netherlands Antilles , New Caledonia , New Zealand , Nicaragua , Niger , Nigeria , Norfolk Island , Northern Ireland , Norway , Oman , Pakistan , Palau , PW, Panama , Papua New Guinea , Paraguay , Peru , Philippines , Poland , Ponape , Portugal , Puerto Rico , PR, Qatar , Reunion , Romania , Rota , Russia , Rwanda , Saba , Saipan , San Marino , Saudi Arabia , Scotland , Senegal , Serbia , Seychelles , Sierra Leone , Singapore , Slovakia , Slovenia , Solomon Islands , South Africa , South Korea , Spain , Sri Lanka , St. Barthelemy , St. Christopher , St. Croix , St. Eustatius , St. John , St. Kitts and Nevis , St. Lucia , St. Maarten , St. Martin , St. Thomas , St. Vincent/Grenadines , Suriname , Swaziland , Sweden , Switzerland , Syria , Tahiti , Taiwan , Tajikistan , Tanzania , Thailand , Timor Leste , Tinian , Togo , Tonga , Tortola , Trinidad and Tobago , Truk , Tunisia , Turkey , Turkmenistan , Turks and Caicos Islands , Tuvalu , Uganda , Ukraine , Union Island , United Arab Emirates , United Kingdom , United States , Uruguay, US Virgin Islands , VI, Uzbekistan , Vanatu , Vatican City State , Venezuela , Vietnam , Virgin Gorda , Wales , Wallia and Futuna Islands , Western Samoa , Yap , Yemen , Zambia , Zimbabwe
    we try to ship to the world largest cities Tokyo,Japan, Seoul, South Korea, Mexico City, Mexico , New York City, USA , Mumbai, India , Jakarta, Indonesia , Sáo Paulo, Brazil, Delhi, India , Osaka/Kobe, Japan , Shanghai, China , Manila, Philippines ,Los Angeles, USA ,Calcutta, India , Moscow, Russian Fed., Cairo, Egypt, Lagos, Nigeria, Buenos Aires, Argentina , London, United Kingdom , Beijing, China , Karachi, Pakistan , Dhaka, Bangladesh , Rio de Janeiro, Brazil ,Tianjin, China , Paris, France , Istanbul, Turkey , Lima, Peru , Tehrãn, Iran, Bangkok, Thailand , Chicago, USA , Bogotá, Colombia , Hyderabad, India , Chennai, India , Essen, Germany , Ho Chi Minh City, Vietnam , Hangzhou, China , Hong Kong, China , Lahore, Pakistan , Shenyang, China , Changchun, China , Bangalore, India , Harbin, China , Chengdu, China , Santiago, Chile ,Guangzhou, China , St. Petersburg, Russian Fed , Kinshasa, DRC , Baghdãd, Iraq , Jinan, China , Houston, USA , Toronto, Canada, Yangon, Myanmar (Burma), Alger, Algeria Philadelphia, USA, Qingdao, China , Milano, Italy , Pusan, South Korea, Belo Horizonte, Brazil, Almadabad, India , Madrid, Spain , San Francisco, USA, Alexandria, Egypt , Washington DC, USA , Wuhan, China , Dallas, USA , Guadalajara, Mexico, Chongging, China , Medellin, Colombia, Detroit, USA , Handan, China , Frankfurt, Germany , Porto Alegre, Brazil , Hanoi, Vietnam , Sydney, Australia, Santo Domingo, Dom. Rep., Singapore, Singapore , Casablanca, Morocco , Katowice, Poland , Pune, India , Bangdung, Indonesia, Monterrey, Mexico ,Montréal, Canada , Nagoya, Japan , Nanjing, China , Abidjan, Côte d'Ivoire, Xi'an, China , Berlin, Germany , Riyadh, Saudi Arabia, Recife, Brazil , Dusseldorf, Germany, Ankara, Turkey , Melbourne, Australia, Salvador, Brazil , Dalian, China , Caracas, Venezuela, Adis Abeba, Ethiopia, Athina, Greece, Cape Town, South Africa, Koln, Germany , Maputo, Mozambique, Napoli, Italy