20RA
Developed for smaller equipment where space is at a premium,
the model #20RA alignment system comes with every component necessary
to align machinery with shaft sizes from 3/4" to 4"
in diameter. The alignment frames are precision milled from 6061-T6
aircraft grade aluminum.
#20RA
Kit Contents
- Two (2) alignment frames,
each with one (1) 1/2 inch diameter mounting hole for tubing.
- 20" of #41 roller chain
(attached to frame).
- 2 dial indicator assemblies
with swivel joints and mounting rods.
- 2 each of 1/2" diameter
tubing in 5", 7" and 9" lengths.
- Allen key, 3/16".
- Instruction manual.
- FastMath(tm) worksheets.
- Durable carrying case with
handle.
#20RA
Specifications
|
Minimum
Swing Radius |
Shaft
Accommodation |
Frame
Width |
Radial
Clearance |
|
3.50" |
0.75" to 4" |
0.625" |
2.10" |
Table
Definitions:
Minimum
Swing Radius
The minimum distance from the mounted surface to the base plate
of the equipment. Allows for full rotation of the shaft and coupling
assembly with the alignment tool mounted.
Shaft Accommodations
The diameter of shaft, from smallest to largest that this kit
can be used on.
Frame Width
The thickness of the alignment frame.
Radial Clearance
The maximum distance(s) from the mounted surface to the underside
of the 1/2" diameter tubing used to span the coupling.
#20RA
Key Benefits
- Lightweight design.
- Compact for tight spaces.
- Easy to setup, use and maintain.
- Complete instructions.
- Works with the Alignment Manager®
- Lifetime product warranty
and lifetime toll-free 800 phone support.
- Low Price!
30RA
Our #30RA alignment system was designed to handle larger equipment
- shaft sizes up to 8" in diameter are no problem - but
versatility demanded that it also handle smaller shaft sizes
like the #20RA. What you get is an alignment system that can
handle virtually any alignment job you can throw at it.
#30RA
Kit Contents (link to 62k picture of #30 RA)
- Two (2) alignment frames,
each with three (3) - 1/2 inch diameter mounting hole for tubing.
- 30" of #40 roller chain
(attached to frame).
- 2 dial indicator assemblies
with swivel joints and mounting rods.
- 1/2" diameter tubing:
2 x 5", 7", 9", 12" and 2 x 15" lengths.
- #555 Inspection mirror by
General.
- Allen key, 3/16".
- Instruction manual.
- FastMath(tm) worksheets.
- Durable carrying case with
handle.
#30RA
Specifications
|
Minimum
Swing Radius |
Shaft
Accommodation |
Frame
Width |
Radial
Clearances |
|
5.75" |
0.75" to 8" |
0.750" |
1.88", 3.31"
and 4.81" |
Table
Definitions:
Minimum Swing Radius
The minimum distance from the mounted surface to the base plate
of the equipment. Allows for full rotation of the shaft and coupling
assembly with the alignment tool mounted.
Shaft Accommodations
The diameter of shaft, from smallest to largest that this kit
can be used on.
Frame Width
The thickness of the alignment frame.
Radial Clearance
The maximum distance(s) from the mounted surface to the underside
of the 1/2" diameter tubing used to span the coupling.
#30RA
Key Benefits
- Spans larger couplings than
#20RA.
- Works on a wide range of equipment.
- Easy to setup, use and maintain.
- Complete instructions.
- Works with the Alignment Manager®
- Lifetime product warranty
and lifetime toll-free 800 phone support.
Kits
|
Description |
Product
Code |
|
#20RA Shaft Alignment Kit |
#20RA |
|
#30RA Shaft Alignment
Kit |
#30RA |
|
Both of our alignment kits come
in their own high-impact carrying case, complete with all of
the components you need for trouble-free alignments. |
|
|