link to Home Page Logo, Link to Home Page Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442

..."IN STOCK"... vast selection, over 30,000 different items including,
"hard-to-find/special sizes"
Fast Jump on the Newman Tools' site

link to Thurston Saw index page

download Thurston Saws catalogue (540 Kb)

Thurston Custom Made Blades

THURSTON
SPECIAL
BLADES

A Complete
Range of Special
Blades from
.500" to 10"
diameter.

Materials
High speed steels normally available are M-2, M-42, D-2, T-15 and 440C stainless. In addition, other specialty steels may be quoted upon request.

Diameters Any diameter saw blade or circular product between the range of 1/2" to 10" within manufacturing capabilities. Metric sizes also available within these ranges.

Thickness Thicknesses as low as .003 in certain styles. Dimensional tolerances as close as + or - .0001 depending on outside diameter and thickness.

Tooth Pitches State-of-the-art tooth grinding machines provide us with the capability of supplying blades between 50 and 2.2 TPI (teeth per inch) with a ground tooth form. Blades with pitches coarser than 2.2 TPI can be supplied with a milled tooth form.

Tooth Styles Tooth styles are listed below for your convenience. Please check to confirm that we can manufacture desired tooth style with the type of circular product requested.

Special Saw
Blade Quotation
and Ordering
Instructions When requesting quotations or ordering special saw blades,
please provide the following information:

a. Number of pieces __________

b. Saw diameter __________

c. Saw width __________

d. Arbor hole diameter __________

e. Keyway dimension __________

f. Number of teeth __________

g. Special tooth design* __________

* Blades will be furnished with a standard tooth design
unless otherwise specified.

Back to Top of Page

horz. bar

link to product table of contents link to what's "NEW" link to price list

Newman Tools Logo

Newman Tools Inc.
185 Iber Road
Stittsville, Ottawa, Ontario, Canada K2S 1E7
Phone: 1-613-836- 6776 or 1-800-465-1384
Fax: 1-613 -836 -9070 or 1-800-605-2442

Newman Tools Inc.
151 New Park Avenue
Hartford, CT 06106, USA
Phone: 1-800-465-1384
Fax: 1-800-605-2442

Email: info@newmantools.com

Please send comments, questions, email to tom@newmantools.com ( this email will be returned advising you to resend the email to the following email address )

spamfilter1 "at" newmantools "dot" com. This notation is to prevent the robots from harvesting this email address.

return to Newman Tools Home Page.

Servicing the Canadian provinces of Newfoundland, Nova Scotia, New Brunswick, Prince Edward Island, Quebec, Ontario, Manitoba, Saskatchewan, Alberta ,British Columbia and the states of Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin,Wyoming

updated June 2009, December 2001
Newman Tools Inc.

THURSTON SPECIAL BLADES A Complete Range of Special Blades from .500" to 10" diameter.	Materials	High speed steels normally available are M-2, M-42, D-2, T-15 and 440C stainless. In addition, other specialty steels may be quoted upon request.
	Diameters	Any diameter saw blade or circular product between the range of 1/2" to 10" within manufacturing capabilities. Metric sizes also available within these ranges.
	Thickness	Thicknesses as low as .003 in certain styles. Dimensional tolerances as close as + or - .0001 depending on outside diameter and thickness.
	Tooth Pitches	State-of-the-art tooth grinding machines provide us with the capability of supplying blades between 50 and 2.2 TPI (teeth per inch) with a ground tooth form. Blades with pitches coarser than 2.2 TPI can be supplied with a milled tooth form.
	Tooth Styles	Tooth styles are listed below for your convenience. Please check to confirm that we can manufacture desired tooth style with the type of circular product requested.