TITAN Cathead & Spinning Chain
download Titan technical catalogue
TITAN CATHEAD AND SPINNING CHAINS are grade 80 alloy steel chains. Each chain is equipped with a PETOL X86 Connecting Link and is ready for immediate delivery.
TITAN Cathead and Spinning Chain |
|||
|---|---|---|---|
| CATALOG NO. | SIZE | LENGTH | WEIGHT |
| CATHEAD | |||
| TIT.XT9686-30 | 3/8" | 30 ft. | 42-1/3 lbs. |
| TIT.XT9686-33 | 3/8" | 33 ft. | 46-1/3 lbs. |
| TIT.XT9686-35 | 3/8" | 35 ft. | 49-1/3 lbs. |
| TIT.XT9686-38 | 3/8" | 38 ft. | 54-1/3 lbs. |
| TIT.XT9686-40 | 3/8" | 40 ft. | 56-1/3 lbs. |
| TIT.XT9686-45 | 3/8" | 45 ft. | 63-1/2 lbs. |
| TIT.XT9686-46 | 3/8" | 46 ft. | 64-7/8 lbs. |
| TIT.XT9686-47 | 3/8" | 47 ft. | 66-1/4 lbs. |
| TIT.XT9686-48 | 3/8" | 48 ft. | 67-5/8 lbs. |
| SPINNING | |||
| TIT.XT8486-14 | 1/4" | 14 ft. | 11-3/4 lbs. |
| TIT.XT8486-16 | 1/4" | 16 ft. | 13-1/2 lbs. |
| TIT.XT8486-18 | 1/4" | 18 ft. | 15 lbs. |
| TIT.XT8486-20 | 1/4" | 20 ft. | 16-1/4 lbs. |
| TIT.XT8486-22 | 1/4" | 22 ft. | 17-5/8 lbs. |
| TIT.XT8486-24 | 1/4" | 24 ft. | 19-1/4 lbs. |
| TIT.XT8486-33 | 1/4" | 33 ft. | 27-1/4 lbs. |
| TIT.XT8586-10 | 5/16" | 10 ft. | 10 lbs. |
| TIT.XT8586-14 | 5/16" | 14 ft. | 13-3/4 lbs. |
| TIT.XT8586-16 | 5/16" | 16 ft. | 15-1/4 lbs. |
| TIT.XT8586-18 | 5/16" | 18 ft. | 17-1/2 lbs. |
| TIT.XT8586-20 | 5/16" | 20 ft. | 19 lbs. |
| TIT.XT8586-22 | 5/16" | 22 ft. | 19-5/8 lbs. |
| TIT.XT8586-24 | 5/16" | 24 ft. | 21-3/4 lbs. |
| TIT.XT8586-25 | 5/16" | 25 ft. | 24-3/8 lbs. |
| TIT.XT8586-30 | 5/16" | 30 ft. | 29-1/8 lbs. |
| TIT.XT8586-33 | 5/16" | 33 ft. | 31 lbs. |
| TIT.XT8586-35 | 5/16" | 35 ft. | 33-7/8 lbs. |
| TIT.XT8586-38 | 5/16" | 38 ft. | 36-3/4 lbs. |
| TIT.XT8586-40 | 5/16" | 40 ft. | 38-5/8 lbs. |
| NOTE: Special lengths of chain available upon request. | |||
|
WARNING! Improper use of chain and attachments may cause death or serious injury! DO NOT EXCEED WORKING LOAD LIMIT |
|
||||||||||
|
||||||||||||
|
TITAN grade 80 alloy steel chains
are specifically designed for Spinning and Cathead chain applications only. DO NOT USE FOR OVERHEAD LIFTING. NEVER LIFT PEOPLE OR LOADS OVER PEOPLE. Always follow established industry safe practices & procedures for alloy chain and attachments, as recommended by OSHA, NSC, IADC, AND NACM. |
||||||||||||
PETOL X86 Connecting Link
PETOL
X86 CONNECTING LINKS are forged from high-quality alloy steel,
heat-treated, and 100% proof tested to ensure proper strength
for spinning chain and cathead chain applications.
PETOL X86 Connecting Link |
|||
|---|---|---|---|
| CATALOG NO. | FOR USE WITH CHAIN SIZES | WEIGHT | WORKING LOAD LIMIT |
| PETOL.X86 | 1/4" - 3/8" | 6-1/2 ozs. | 6,600 lbs. |
|
|
WARNING! DO NOT EXCEED 6,600 LBS. WORKING LOAD LIMIT |
|
|
Serious injury or death could
occur if used improperly! The PETOL X86 Connecting Link is for spinning and cathead chain applications only and is NOT TO BE USED FOR OVERHEAD LIFTING. Do not reuse the PETOL X86 Connecting Link after disassembly. |
||
|
Always follow established industry
safe practices & procedures for alloy chain and attachments, as recommended by OSHA, NSC, IADC, AND NACM. |
||
PETOL X86 Connecting Link Assembly Instructions |
|
|---|---|
 1. Slip the PETOL X86 halves through the chain to be connected. |
 2. Couple the PETOL X86 halves. |
 3. With the PETOL X86 positioned as shown, drive in the spacer. |
 4. Turn the PETOL X86 over and peen the projecting spacer prongs. |