THE VORTEC MODEL 608 MINI COLD AIR Gun
Cool Without Contamination
Perfect for Dry Surface Grinding.
Shave hours off your dry surface grinding operations with Vortec's
new Mini Cold Air Gun.
The Mini Cold Air gun provides a contamination-free source of
cooling to keep parts and grinding wheels cool.
Features:
- Constant stream of cold air.
- Cools parts to reduce normalization time and hold tighter
tolerances.
- Reduces Wheel loading.
- Compact size won't interfere with grinding operations.
- The Mini Cold Air Gun's special magnetic base conveniently
attaches to most surface grinders.
- Adjustable magnetic base allows instant installation and
positioning near the wheel for maximum cooling performance.
- Cools Without Contamination
- Cools without Freon or other refrigerants.
- No moving parts to break - maintenance-free.
- Powered by compressed air (8 SCFM,70~100 PSIG maximum}.
Advantages
- Vortec's new Mini Cold Air Gun is not just another cold
air gun!
- It's the First and only Cold Air Gun designed specifically
to meet the special cooling needs of dry surface grinding.
- Perhaps the biggest problem facing customers who do dry surface
grinding is normalization - or waiting for the workplace to cool
after grinding so measurements can be taken
- If normalization time could be eliminated, production
timescould be reduced at least 50%.
- The Mini Cold Air Gun so effectively cools the workpiece
that normalization time is reduced a least 50% - and, in some
cases, it is eliminated!
- This reduction easily translates to time saving of an hour.
Based on a $30/hour labor rate, the Mini Cold Air Gun pays for
itself in about 20 hours!
- The Mini Cold Air Gun's small profile doesn't get in the
customer's way.
And, since the Gun is mounted right at the work area, it's not necessary to sacrifice cold air to the Loc-Line (the Mini Cold Air Gun's consumption is only 8 SCFM)
Models
The Mini Cold Air Gun is available in two configurations:
- 608 Mini Cold Air Gun with base and filter-
- 608J - Mini Cold Air Gun with base -
Expect results like this in your operation:
Application: Grind top surface of mold (5"
x 8" x 3") maintaining a 0.00005" tolerance.
Material: 420 stainless, 53 Rockwell.
Grinding Wheel: Norton, 100K, 7" x 1/4" x 1-1/4".
Results: Did not have to wait for mold to normalize between measurements.
Production time was reduced by 75%.
Application: Grind set of core pins
Material: H-13 tool Steel
Grinding wheel: Norton, 120K, 7"x 1/4" x 1-1/4".
Results: Reduced time waiting for part to normalize and improved
bevel quality.
Production time was reduced by 50%.
link to Vortex Tubes
