WALTON Taps Extractors

Search the Newman Tools site

WALTON Taps Extractors

How to Use |   Sets | Individual extractors and finger replacements

order on line
add to cart

 

Remove broken taps and save the threads! Walton Tap Extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts.

The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. This effective method has been used since 1908. They are available in every tap size, both inch and metric, as handy sets or individual pieces.

Our Tap Extractors will fit both NC and NF taps.

Extracting a broken tap from a cast part.

 

3 Simple Steps For Removing Broken Taps - The Easy Way
Thoroughly remove all chips of the broken tap. Insert the Extractor fingers into the flutes of the broken tap, pushing them gently, but firmly, into position. Push the holder down until it touches the broken tap. Slide the sleeve down until it touches the work. Apply a tap wrench to the square end of the holder. Twist forward and backward a few times to loosen, then back out the broken tap.

 

 

 

STANDARD SETS:
Each set is packed in sturdy plastic compartmented case.

order on line
add to cart


 

EXT-1 EXT-2 EXT-3 EXT-11 EXT-13 EXT-15
-- -- -- -- #4* #4*
-- -- -- 1/8"* #5* #5*
-- -- -- -- #6* #6*
-- -- -- -- #8 #8
3/16" -- -- 3/16" #10 #10
-- -- -- -- #12 #12
1/4" 1/4" -- 1/4" 1/4" 1/4"
5/16" 5/16" 5/16" 5/16" 5/16" 5/16"
3/8" 3/8" 3/8" 3/8" 3/8" 3/8"
7/16" 7/16" 7/16" 7/16" 7/16" 7/16"
1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
-- 5/8" 9/16" 5/8" 5/8" 5/8"
-- -- 5/8" 3/4" 3/4" 3/4"
-- -- -- 7/8" -- 7/8"
-- -- -- 1" -- 1"
Sizes Included * 3-Flute style supplied for sizes shown. All others in 4-Flute style.

STANDARD SETS:Nos. 1, 2, 3 Packed in 6-compartment plastic case

STANDARD SETS: Nos. 11, 13, 15 Packed in 15-compartment plastic case

 

 



order on line
add to cart

Taps Extractors and replacement fingers

 

Tap Size COMPLETE TAP EXTRACTOR EXTRA FINGERS
6 flute 4 flute 3 flute 2 flute 6 flute 4 flute 3 flute 2 flute
#4 (3mm) -- -- EXT.4.3 EXT.4.2 -- -- EXT.4.3F EXT.4.2F
#5 (1/8")(3.2mm) -- -- EXT.5.3 EXT.5.2 -- -- EXT.5.3F EXT.5.2F
#6 (3.5mm) -- EXT.6.4 EXT.6.3 EXT.6.2 -- EXT.6.4F EXT.6.3F EXT.6.2F
#8 (4mm) -- EXT.8.4 EXT.8.3 EXT.8.2 -- EXT.8.4F EXT.8.3F EXT.8.2F
#10 (3/16")(5mm) -- EXT.10.4 EXT.10.3 EXT.10.2 -- EXT.10.4F EXT.10.3F EXT.10.2F
#12 (5.5mm) -- EXT.12.4 EXT.12.3 EXT.12.2 -- EXT.12.4F EXT.12.3F EXT.12.2F
1/4" (6mm) -- EXT.1/4.4 EXT.1/4.3 EXT.1/4.2 -- EXT.1/4.4F EXT.1/4.3F EXT.1/4.2F
9/32" (7mm) -- EXT.9/32.4 -- -- -- EXT.9/32.4F -- --
5/16" (7mm, 8mm) -- EXT.5/16.4 EXT.5/16.3 EXT.5/16.2 -- EXT.5/16.4F EXT.5/16.3F EXT.5/16.2F
11/32" -- EXT.11/32.4 -- -- -- EXT.11/32.4F -- --
3/8" (9mm, 10mm) -- EXT.3/8.4 EXT.3/8.3 EXT.3/8.2 -- EXT.3/8.4F EXT.3/8.3F EXT.3/8.2F
13/32" (10mm) -- EXT.13/32.4 -- -- -- EXT.13/32.4F -- --
7/16" (11mm) -- EXT.7/16.4 EXT.7/16.3 EXT.7/16.2 -- EXT.7/16.4F EXT.7/16.3F EXT.7/16.2F
1/2" (12mm) -- EXT.1/2.4 EXT.1/2.3 EXT.1/2.2 -- EXT.1/2.4F EXT.1/2.3F EXT.1/2.2F
9/16" (14mm) -- EXT.9/16.4 EXT.9/16.3 -- -- EXT.9/16.4F EXT.9/16.3F --
5/8" (16mm) -- EXT.5/8.4 EXT.5/8.3 -- -- EXT.5/8.4F EXT.5/8.3F --
11/16" (18mm) -- EXT.11/16.4 -- -- -- EXT.11/16.4F -- --
3/4" (18mm, 20mm) -- EXT.3/4.4 EXT.3/4.3 -- -- EXT.3/4.4F EXT.3/4.3F --
7/8" (22mm) -- EXT.7/8.4 EXT.7/8.3 -- -- EXT.7/8.4F EXT.7/8.3F --
1" (24mm, 25mm) -- EXT.1.4 EXT.1.3 -- -- EXT.1.4F EXT.1.3F --
11/8" (26-28mm) EXT.1.1/8.6 EXT.1.1/8.4 - -- EXT.1.1/8.6F EXT.1.1/8.4F - --
11/4" (30-32mm) EXT.1.1/4.6 EXT.1.1/4.4 -- -- EXT.1.1/4.6F EXT.1.1/4.4F -- --
13/8" (35-36mm) EXT.1.3/8.6 EXT.1.3/8.4 -- -- EXT.1.3/8.6F EXT.1.3/8.4F -- --
11/2" (38mm) EXT.1.1/2.6 EXT.1.1/2.4 -- -- EXT.1.1/2.6F EXT.1.1/2.4F -- --