EconoCheck
Instant Gaging Fixtures
for Multiple Checking of Machined Parts

Model ECO.1101-G
A basic unit for checking:

  • Blind hold depths
  • Concentricities
  • Lengths
  • Diameters
  • Shoulder lengths

IDEAL FOR USE WITH
OTHER ECONO-CHECK
ACCESSORIES.

Model 1101-G includes:

  • 4 3/4" x 5 1/2" Base Plate (Precision Ground Finish)
  • No. 102 1" x 9" Upright Post (Ground and Polished)
  • No. 103 AGD Indicator Support Bracket.
  • Less Dial Indicator.

Model ECO.A-Group
A compact multi-purpose unit for checking external dimensions of--

  • Plain diameters
  • Snap-ring groove diameters
  • O-ring groove diameters

NOTE:  THIS UNIT POSITIVELY LOCATES PART FOR RAPID CHECKING.

Model A-Group includes:

  • No. 1101-G-DT Econo-Check
  • No. 106 Parallel Fixture
  • No. 106-A Groove bar
  • No. 107 90° Angle Fixture
  • No.107-A Ground Guide bar
  • No. 109 Indicator point adaptor
  • Selection of contact points
  • Less Dial Indicator

Model ECO.B-Group

A single post unit jwith removable platen. For checking--

  • Counterbore depths
  • Recess depths
  • Shoulder lengths
  • Indispensable for locating internal and external grooves and forms

Model B-Group includes:

  • No. 1101-G Econo-Check
  • No. 108 G Platen
  • No. 108-A Guide Stops--pair
  • No. 109 Contact Point Adaptor

We suggest these optional items to be requistioned with the Model B-Group: No. 108-B Spring Retainer Assembly. Selection of Contact Points and Hooks.

Model ECO.201-P Base

Precision Ground Finish for Two-post Unit

  • Can check several dimensions at one checking station.
  • Permits use of several Econo-Check accessories
  • Provides multiple checking stations
  • Indispensable for locating internal and external grooves and forms

Model 201-P Base includes:

  • No. 1101-G Econo-Check
  • No. 108 G Platen
  • No. 108-A Guide Stops--pair
  • No. 109 Contact Point Adaptor

We suggest these optional items to be requistioned with the Model B-Group: No. 108-B Spring Retainer Assembly. Selection of Contact Points and Hooks.

Model ECO.201-G-DT-Base
Precision Ground Finish for Two-post Unit

  • Permits use of several Econo-Check accessories
  • Provides multiple checking stations
  • Can check several dimensions at one checking station
  • Groove Locations
  • Groove Diameters

Model 201-G-DT-Base includes:

22 (1/4" - 20 UNC) drilled and tapped holes to accommodate attachment of Econo-Check accessories. This Model can be ordered with a variety of components to assemble a versatile checking unit. (Base plate only.)

Model ECO.1111

  • 1" x 9" upright post
  • 3" round hardened steel anvil base
  • Fine adjustment feature optional
  • Less Dial Indicator
 

Universal Support Bracket (No. ECO.103)

  • The universal bracket provides firm support through attachment to indicator lug.
 

Universal Support Bracket (No. ECO.203)

  • fine adjustment feature.
 

Universal Support Bracket (No. ECO.113)

  • with 3/8" diameter hole to accomodate stems n AGD indicators and air jets.
 

Universal Support Bracket (No.ECO. 213)

  • Same as No. 113 with fine adjustment feature.
 

Universal Support Bracket (No. ECO.111)

  • The 5/8" sliding rod permits horizontal adjustment and swivel of indicator.
 

Universal Support Bracket (No. ECO.313, ECO.316)

  • No. ECO.313 - Lug Back Mounting Indicator Bracket. Suitable for an indicator that has a Lug Back that can be turned to the horizontal position.
  • No. ECO.316 - Lug Back Mounting Indicator Bracket. With fine adjustment.
  • The above brackets are designed to allow vertical and directional adjustment on a 1" diameter post.
 

Platen (No. ECO.108-GX)

  • Platen Assembly including Self-contained Indicator Support Bracket No. 108-X. Less Dial Indicator. Illustrated with two 108-A Guide Stops and a 109 Contact Point Adapter.
 

Platen (No. ECO.108-G)

  • Platen with 4 1/2" x 4 1/2" ground finish working area. Illustrated with 108-A ground Guide Stops and No. 103 Indicator Support Bracket. Ideal fixture for checking depths, recesses, shoulders, internal and external groove locations. Less Dial Indicator.
 

Indicator Support Bracket (No. ECO.108-X)

  • Can be used with No. 108 Platen to facilitate a variety of checking situations. The 3/8" Diameter hole assures perfect alignment of indicator stem
 

 



servicing the Canadian provinces of Newfoundland, Nova Scotia, New Brunswick, Prince Edward Island, Quebec, Ontario, Manitoba, Saskatchewan, Alberta ,British Columbia and the states of Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin,Wyoming We can ship via UPS to Afghanistan , Aland Islands , Albania , Algeria , American Samoa , Andorra , Angola , Anguilla , Antigua & Barbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Azores , Bahamas , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bermuda , Bhutan , Bolivia , Bonaire , Bosnia , Botswana , Brazil , British Virgin Isles , Brunei , Bulgaria , Burkina Faso , Burundi , Cambodia , Cameroon , Canada , Canary Islands , Cape Verde , Cayman Islands , Central African Republic , Chad , Chile , China , Colombia , Comoros , Congo , Cook Islands , Costa Rica , Croatia , Curacao , Cyprus , Czech Republic , Democratic Republic of Congo , Denmark , Djibouti , Dominica , Dominican Republic , Ecuador , Egypt , El Salvador , England , Equatorial Guinea , Eritrea , Estonia , Ethiopia , Faeroe Islands , Fiji , Finland , France , French Guiana , French Polynesia , Gabon , Gambia , Georgia , Germany , Ghana , Gibraltar , Greece , Greenland , Grenada , Guadeloupe , Guam , Guatemala , Guernsey , Guinea , Guinea-Bissau , Guyana , Haiti , Holland , Honduras , Hong Kong , Hungary , Iceland , India , Indonesia , Iraq , Ireland , Israel , Italy , Ivory Coast , Jamaica , Japan , Jersey , Jordan , Kazakhstan , Kenya , Kiribati , Kosrae , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Liechtenstein , Lithuania , Luxembourg , Macau , Macedonia (Fyrom) , Madagascar , Madeira , Malawi , Malaysia , Maldives , Mali , Malta , Marshall Islands , Martinique , Mauritania , Mauritius , Mayotte , Mexico , Micronesia , Moldova , Monaco , Mongolia , Montenegro , Montserrat , Morocco , Mozambique , N. Mariana Islands , Namibia , Nepal , Netherlands , Netherlands Antilles , New Caledonia , New Zealand , Nicaragua , Niger , Nigeria , Norfolk Island , Northern Ireland , Norway , Oman , Pakistan , Palau , Panama , Papua New Guinea , Paraguay , Peru , Philippines , Poland , Ponape , Portugal , Puerto Rico , Qatar , Reunion , Romania , Rota , Russia , Rwanda , Saba , Saipan , San Marino , Saudi Arabia , Scotland , Senegal , Serbia , Seychelles , Sierra Leone , Singapore , Slovakia , Slovenia , Solomon Islands , South Africa , South Korea , Spain , Sri Lanka , St. Barthelemy , St. Christopher , St. Croix , St. Eustatius , St. John , St. Kitts & Nevis , St. Lucia , St. Maarten , St. Martin , St. Thomas , St. Vincent/Grenadines , Suriname , Swaziland , Sweden , Switzerland , Syria , Tahiti , Taiwan , Tajikistan , Tanzania , Thailand , Timor Leste , Tinian , Togo , Tonga , Tortola , Trinidad & Tobago , Truk , Tunisia , Turkey , Turkmenistan , Turks & Caicos Islands , Tuvalu , Uganda , Ukraine , Union Island , United Arab Emirates , United Kingdom , United States , Uruguay, US Virgin Islands , Uzbekistan , Vanatu , Vatican City State , Venezuela , Vietnam , Virgin Gorda , Wales , Wallia & Futuna Islands , Western Samoa , Yap , Yemen , Zambia , Zimbabwe