Reamer Index page
R1500 Straight shank Chucking, LH spiral, RH cut
R1100 Taper shank Chucking, LH spiral , RH cut R1101 Taper shank chucking, straight flute |
CHUCKING REAMERS: A general purpose Reamer that is used in a variety of applications and materials. These are available in a variety of different styles such as Straight Shank, Taper Shank, and Stub Screw Machine. |
R275 Straight Flute, Hand |
TAPER PIN REAMERS: These are designed for reaming holes so that standard taper pins will be able to fit properly. Best results will be attained if the hole is drilled a few thousandths smaller than the small diameter of the finished reamed hole. |
R.CAR |
CAR REAMERS: Car Reamers are designed for Railroad Car building work. A special cutting chamfer allows for easy entry and fast cutting in badly offset and burnt holes. |
 |
JIG BORER: Used in Die Shops and wherever close tolerances are to be held. |
 |
CARBIDE REAMERS: Made from premium Micro-Grain Carbide, they are precision ground to tight tolerances, provide superior finishes, improved hole sizes, and can be ran at higher speeds and feeds. link to Carbide Tipped Straight Shank Chucking Reamer page |
 R.PIPE |
TAPER PIPE REAMERS: Taper Pipe Reamers are used before tapping with a variety of different types of pipe taps those include NPTF, Dryseal, and ANPT. |
R1400 Hand Reamer, LH spiral , RH cut R1401 Hand Reamer, Straight Flute |
HAND REAMERS: Designed to be used by hand these reamers have a tapered lead for easy entry and a square on the end for use by a wrench. Used by maintenance and many other applications where the holes need to be reamed by hand. |
|
R.H- |
Link to HSS Adjustable Expanding Hand Reamers |
|
BRIDGE REAMERS: Bridge Reamers are designed for use in structural steel, in the building industry, bridge erection, and ship construction. The cutting end of the flutes is tapered therefore allowing the reamer not only to enter overlapping holes but also permits insertion into very badly misaligned holes. Bridge Reamers are commonly used in portable electric or pneumatic machines. |
 |
STUB SCREW MACHINE: Made in variety of flute configurations, these are designed for use in Screw Machines. They fit standard size tool holders and the pinhole allows them to be used in pin drive floating holders. link to stub machine reamer page
|
R1531"size"CO (fractional sizes) R1600"size"CO for decimal sizes |
COBALT REAMERS: Made in a variety of sizes and styles, Cobalt Reamers afford quality finishes and increased tool life. |
|
DOWEL PIN REAMERS: Made with a minus tolerance, used for reaming holes for dowel pins in the automotive industry and mold shops. |
decimal reamers in stock .060 to .500 x .001 increments
0.060 , 0.061 , 0.062 , 0.063 , 0.064 , 0.065 , 0.066 , 0.067 , 0.068 , 0.069 , 0.070 , 0.071 , 0.072 , 0.073 , 0.074 , 0.075 , 0.076 , 0.077 , 0.078 , 0.079 , 0.080 , 0.081 , 0.082 , 0.083 , 0.084 , 0.085 , 0.086 , 0.087 , 0.088 , 0.089 , 0.090 , 0.091 , 0.092 , 0.093 , 0.094 , 0.095 , 0.096 , 0.097 , 0.098 , 0.099 , 0.100 , 0.101 , 0.102 , 0.103 , 0.104 , 0.105 , 0.106 , 0.107 , 0.108 , 0.109 , 0.110 , 0.111 , 0.112 , 0.113 , 0.114 , 0.115 , 0.116 , 0.117 , 0.118 , 0.119 , 0.120 , 0.121 , 0.122 , 0.123 , 0.124 , 0.125 , 0.126 , 0.127 , 0.128 , 0.129 , 0.130 , 0.131 , 0.132 , 0.133 , 0.134 , 0.135 , 0.136 , 0.137 , 0.138 , 0.139 , 0.140 , 0.141 , 0.142 , 0.143 , 0.144 , 0.145 , 0.146 , 0.147 , 0.148 , 0.149 , 0.150 , 0.151 , 0.152 , 0.153 , 0.154 , 0.155 , 0.156 , 0.157 , 0.158 , 0.159 , 0.160 , 0.161 , 0.162 , 0.163 , 0.164 , 0.165 , 0.166 , 0.167 , 0.168 , 0.169 , 0.170 , 0.171 , 0.172 , 0.173 , 0.174 , 0.175 , 0.176 , 0.177 , 0.178 , 0.179 , 0.180 , 0.181 , 0.182 , 0.183 , 0.184 , 0.185 , 0.186 , 0.187 , 0.188 , 0.189 , 0.190 , 0.191 , 0.192 , 0.193 , 0.194 , 0.195 , 0.196 , 0.197 , 0.198 , 0.199 , 0.200 , 0.201 , 0.202 , 0.203 , 0.204 , 0.205 , 0.206 , 0.207 , 0.208 , 0.209 , 0.210 , 0.211 , 0.212 , 0.213 , 0.214 , 0.215 , 0.216 , 0.217 , 0.218 , 0.219 , 0.220 , 0.221 , 0.222 , 0.223 , 0.224 , 0.225 , 0.226 , 0.227 , 0.228 , 0.229 , 0.230 , 0.231 , 0.232 , 0.233 , 0.234 , 0.235 , 0.236 , 0.237 , 0.238 , 0.239 , 0.240 , 0.241 , 0.242 , 0.243 , 0.244 , 0.245 , 0.246 , 0.247 , 0.248 , 0.249 , 0.250 , 0.251 , 0.252 , 0.253 , 0.254 , 0.255 , 0.256 , 0.257 , 0.258 , 0.259 , 0.260 , 0.261 , 0.262 , 0.263 , 0.264 , 0.265 , 0.266 , 0.267 , 0.268 , 0.269 , 0.270 , 0.271 , 0.272 , 0.273 , 0.274 , 0.275 , 0.276 , 0.277 , 0.278 , 0.279 , 0.280 , 0.281 , 0.282 , 0.283 , 0.284 , 0.285 , 0.286 , 0.287 , 0.288 , 0.289 , 0.290 , 0.291 , 0.292 , 0.293 , 0.294 , 0.295 , 0.296 , 0.297 , 0.298 , 0.299 , 0.300 , 0.301 , 0.302 , 0.303 , 0.304 , 0.305 , 0.306 , 0.307 , 0.308 , 0.309 , 0.310 , 0.311 , 0.312 , 0.313 , 0.314 , 0.315 , 0.316 , 0.317 , 0.318 , 0.319 , 0.320 , 0.321 , 0.322 , 0.323 , 0.324 , 0.325 , 0.326 , 0.327 , 0.328 , 0.329 , 0.330 , 0.331 , 0.332 , 0.333 , 0.334 , 0.335 , 0.336 , 0.337 , 0.338 , 0.339 , 0.340 , 0.341 , 0.342 , 0.343 , 0.344 , 0.345 , 0.346 , 0.347 , 0.348 , 0.349 , 0.350 , 0.351 , 0.352 , 0.353 , 0.354 , 0.355 , 0.356 , 0.357 , 0.358 , 0.359 , 0.360 , 0.361 , 0.362 , 0.363 , 0.364 , 0.365 , 0.366 , 0.367 , 0.368 , 0.369 , 0.370 , 0.371 , 0.372 , 0.373 , 0.374 , 0.375 , 0.376 , 0.377 , 0.378 , 0.379 , 0.380 , 0.381 , 0.382 , 0.383 , 0.384 , 0.385 , 0.386 , 0.387 , 0.388 , 0.389 , 0.390 , 0.391 , 0.392 , 0.393 , 0.394 , 0.395 , 0.396 , 0.397 , 0.398 , 0.399 , 0.400 , 0.401 , 0.402 , 0.403 , 0.404 , 0.405 , 0.406 , 0.407 , 0.408 , 0.409 , 0.410 , 0.411 , 0.412 , 0.413 , 0.414 , 0.415 , 0.416 , 0.417 , 0.418 , 0.419 , 0.420 , 0.421 , 0.422 , 0.423 , 0.424 , 0.425 , 0.426 , 0.427 , 0.428 , 0.429 , 0.430 , 0.431 , 0.432 , 0.433 , 0.434 , 0.435 , 0.436 , 0.437 , 0.438 , 0.439 , 0.440 , 0.441 , 0.442 , 0.443 , 0.444 , 0.445 , 0.446 , 0.447 , 0.448 , 0.449 , 0.450 , 0.451 , 0.452 , 0.453 , 0.454 , 0.455 , 0.456 , 0.457 , 0.458 , 0.459 , 0.460 , 0.461 , 0.462 , 0.463 , 0.464 , 0.465 , 0.466 , 0.467 , 0.468 , 0.469 , 0.470 , 0.471 , 0.472 , 0.473 , 0.474 , 0.475 , 0.476 , 0.477 , 0.478 , 0.479 , 0.480 , 0.481 , 0.482 , 0.483 , 0.484 , 0.485 , 0.486 , 0.487 , 0.488 , 0.489 , 0.490 , 0.491 , 0.492 , 0.493 , 0.494 , 0.495 , 0.496 , 0.497 , 0.498 , 0.499 , 0.500 , 0.501 , |
|
R1000 Taper Shank, LH spiral , RH cut R1001 Taper Shank, straight flutes |
TAPER SHANK: Designed to fit ANS (MORSE) Taper Sockets and Sleeves. These Reamers are similar in design to Straight Shank Reamers. They can be used in a number of different types of applications and materials. |
P62 Taper Shank Machine Reamers: Quick Spiral for through holes |
|
| Tapered Reamers | |
 |
Automotive Taper Reamers: 1 1/2" Taper per Foot (.1250" per Inch) with Squared Shank |
 |
|
 |
Link to Duplex Brown & Sharpe
Taper Reamer R1400BS?DUP |
 |
Die Maker: Link to .005 taper per inch. link to .0087 taper per inch link to .013 taper per inch |
| Jarno Taper Reamers: | |
 |
Jarno Taper Reamers: .050" Taper per Inch with Squared Shank |
Morse Taper Reamers: |
|
| |
Link to Helical Morse Taper Reamer
with Squared Shank R1400MT |
 |
Link to Helical Morse Taper
Reamer with Morse Taper Shank R1000MT |
 |
Link to Duplex Morse Taper Reamer
with Squared Shank R1400MT?DUP |
 |
Link to Duplex Morse Taper Reamer
with Morse Taper Shank R1000MT?DUP |
| Taper Pin Reamers | |
 |
Link to Helical Taper Pin Reamer R279 |
 |
|
 |
Duplex Morse Taper Welding Equipment Reamer |
 |
Link to RWMA Welding Equipment Reamer |
| Type | ||||||
|---|---|---|---|---|---|---|
special size.
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
|
|||||